eventPdStatus
OMNITRON-TRAP-MIB ·
.1.3.6.1.4.1.7342.6.13
Object
scalar
Bits
A vector of bits that indicates the PoE PD Status
A bit set to '1' indicates the specific errored condition. A bit set to
'0' indicates the specific errored condition is not present
bNoPdDetected(0) No PD device found for a PSE enabled port
bIllegalClassification(1) PD device classification is illegal or
unrecognized
bOverCurrent(2) PD device requesting more power than
was determined during classification
bBrownOut(3) PD device are experiencing brown-out since
PSE cannot source requested power
bInsufficientPower(4) PD device is not powered since power
classification cannot be met
bHeartbeatLost(5) PD device with heartbeat enabled is not
responding with heartbeat
Context
- MIB
- OMNITRON-TRAP-MIB
- OID
.1.3.6.1.4.1.7342.6.13- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- omnitronNotificationObjects
- Siblings
- 19
Syntax
Bits
Values & Constraints
Enumerated Values
0 | bNoPdDetected |
1 | bIllegalClassification |
2 | bOverCurrent |
3 | bBrownOut |
4 | bInsufficientPower |
5 | bHeartbeatLost |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapAgMdIndex Holds the Maintenance Domain Index of the MEP generating the 802.1ag
trap | scalar | Unsigned32 | .1.3.6.1.4.1.7342.6.1 |
| eventPortClockState Holds the port clock state at the time of the notification | scalar | OMNITRON-TC-MIBOstPortClockType | .1.3.6.1.4.1.7342.6.10 |
| eventDpoeStageNumber Holds the DPoE stage number at the time of the notification | scalar | Unsigned32 | .1.3.6.1.4.1.7342.6.11 |
| eventSetClear Holds the alarm status at the time of the notification
alarmSet(1) Alarm is active or set
alarmClear(2) Alarm is not active or cleared | scalar | Enumeration | .1.3.6.1.4.1.7342.6.12 |
| contactClosureStatus Holds the contact closure status at the time of the notification
contactOpen(1) Contact closure is open
contactClosed(2) Contact closure is closed | scalar | Enumeration | .1.3.6.1.4.1.7342.6.14 |
| eventSrcIp Originating IPv4 address of the cause of the event. This object indicates
the IP address of the cause of the error condition. For instance this
object indicates the IP address of … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.6.15 |
| eventAclNumber ACL index number used to indicate which ACL was violated. A value of 0
indicates the default value was violated. A non-zero value indicates
the specific ostAclCfgIndex that caused… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.6.16 |
| eventProbePriorityNew Indicates the new probe VLAN C-TAG and S-TAG PCP
(priority field) at the time of the notification
Bits 4..1 are the C-TAG (inner tag) PCP field
Bits 8..5 are the S-TAG … | scalar | Unsigned32 | .1.3.6.1.4.1.7342.6.17 |
| eventProbePriorityOld Indicates the old probe VLAN C-TAG and S-TAG PCP
(priority field) at the time of the notification
Bits 4..1 are the C-TAG (inner tag) PCP field
Bits 8..5 are the S-TAG … | scalar | Unsigned32 | .1.3.6.1.4.1.7342.6.18 |
| eventSrcIpString Originating IPv6 address of the cause of the event. This
object indicates the IP address of the cause of the error condition.
For instance this object indicates the IP address of… | scalar | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.6.19 |
| trapAgMaIndex Holds the Maintenance Association Index of the MEP generating the 802.1ag
trap | scalar | Unsigned32 | .1.3.6.1.4.1.7342.6.2 |
| eventProtectState Indicates the ring status of a module associated with a port | scalar | OMNITRON-TC-MIBOstErpsRingStatus | .1.3.6.1.4.1.7342.6.20 |
| trapAgMepId Holds the MEPID value of the MEP generating the 802.1ag trap | scalar | Integer32 | .1.3.6.1.4.1.7342.6.3 |
| trapAgErrorCode Holds the error code of the MEP generating the 802.1ag trap. This value
is the same as dot1agCfmMepHighestPrDefect returned with the 802.1ag
dot1agCfmFaultAlarm notification, see … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.6.4 |
| eventNotificationType Holds the event notification type.
Possible values are:
0x01 - Errored Symbol Period
0x02 - Errored Frame
0x03 - Errored Frame Period
0x04 - Errored Frame Seconds … | scalar | Integer32 | .1.3.6.1.4.1.7342.6.5 |
| eventNotificationErrors Holds the number of errors in the specified period | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7342.6.6 |
| eventNotificationErrorTotal Holds the sum of errors since OAM sublayer was reset | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7342.6.7 |
| eventNotificationEventsTotal Holds the number of events since reset | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.7342.6.8 |
| eventThresholdIdentification Holds the threshold identification value | scalar | Enumeration | .1.3.6.1.4.1.7342.6.9 |