ntnQosPolicyDeviceIdentTable

NTN-QOS-POLICY-EVOL-PIB · .1.3.6.1.4.1.45.4.7.1.11.2

Object

table

This class contains a single policy rule instance that
contains device-specific information.

Context

MIB: NTN-QOS-POLICY-EVOL-PIB
OID: .1.3.6.1.4.1.45.4.7.1.11.2
Type: table
Status: current
Parent: ntnQosPolicyAgtClasses
Siblings: 22
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ntnQosPrcSupportTable Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class that are supported.	table	-	`.1.3.6.1.4.1.45.4.7.1.11.1`
ntnQosConfigDappEnable Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will be allocated to track and report on DoS attack d…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.10`
ntnQosConfigDappMinTcpHdrSize DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dropped if the TCP header (IP payload) is less than t…	scalar	Integer32	`.1.3.6.1.4.1.45.4.7.1.11.11`
ntnQosConfigDappIpv4IcmpMaxLength DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload) exceeds this value.	scalar	Integer32	`.1.3.6.1.4.1.45.4.7.1.11.12`
ntnQosConfigDappIpv6IcmpMaxLength DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this value.	scalar	Integer32	`.1.3.6.1.4.1.45.4.7.1.11.13`
ntnQosConfigNtApplicationMode Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment over non-NT application traffic. 'Mixed' mode process…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.14`
ntnQosConfigQosOperMode Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, installed QoS components are temporarily removed …	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.15`
ntnQosConfigTrustedProcessingMode Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as trusted. A mode of 'partialDscpMapping(1)' causes fil…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.16`
ntnQosConfigResetToPartialDefaults Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. QoS data that requires a sy…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.7.1.11.17`
ntnQosConfigClearStats All counters that are associated with QoS policies are reset to zero by setting the value of this object to 'true(1)'. The value 'false(2)' will always be returned when queryin…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.7.1.11.18`
ntnQosConfigFcoeRedirOperMode Controls the FCoE redirection service for the system. Enabling the service will initiate validation and possible reservation of the resources that are required for service activat…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.19`
ntnQosConfigFcoeControllerMacAddr The 802 MAC address of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection serv…	scalar	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.45.4.7.1.11.20`
ntnQosConfigFcoeRedirAvail Controls access to the FCoE Redirect functionality. A value of 'accessible(1)' indicates that the FCoE support can be accessed by an external FCoE Network Controller (FNC). A valu…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.21`
ntnQosConfigFcoeControllerIfIndex The interface index of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection serv…	scalar	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.45.4.7.1.11.22`
ntnQosConfigFcoeControllerVlan The VLAN associated with the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the FCoE redirection se…	scalar	Integer32	`.1.3.6.1.4.1.45.4.7.1.11.23`
ntnQosConfigResetToDefaults All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. The value 'false(2)' will al…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.7.1.11.3`
ntnQosConfigTrackStatistics The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are created to enforce the default QoS processing rules a…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.4`
ntnQosConfigNVCommitDelay Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile storage. Delaying NV access can be used to minimize fi…	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.45.4.7.1.11.5`
ntnQosConfigDefaultQueueCfg The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is characterized by the number of queues in t…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.6`
ntnQosConfigDefaultBufferingCaps The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buffers. The buffering resources associated…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.7`
ntnQosConfigUBPSupportLevel Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the value of this attribute to 'ubpSupportDisabled(…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.8`
ntnQosConfigRoleAssocCompatLevel Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of this attribute to 'roleAssocCompatLoose(1)' means tha…	scalar	Enumeration	`.1.3.6.1.4.1.45.4.7.1.11.9`

Child Objects