ntnQosConfigTrackStatistics
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.11.4
Object
scalar
r/w
Enumeration
The value of this attribute determines if
statistics tracking is enabled for system-level
policies. System-level policies are created to
enforce the default QoS processing rules
associated with 'trusted' and 'untrusted'
interface classes.
This attribute is consulted during system
policy creation. Setting this object to
'disabled(1)' causes statistics tracking to be
disabled for the system-level policy being created.
No statistics counter resources will be consumed.
Setting this attribute to 'individual(2)' causes
individual counters to be allocated for each
classifier that comprises the system-level policy.
A value of 'aggregate(3)' causes a single
statistics counter to be allocated to track data
associated with all of the classifiers that
comprise the system policy.
The value of this attribute is consulted when
a policy is created or reinstalled. This allows
the filter statistics tracking to be enabled
only when deemed necessary.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.11.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ntnQosPolicyAgtClasses
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosPrcSupportTable Each instance of this class specifies a PRC that the device
supports and a bit string to indicate the attributes of the
class that are supported. | table | - | .1.3.6.1.4.1.45.4.7.1.11.1 |
| ntnQosConfigDappEnable Dictates whether the DoS Attack Prevention Package
(DAPP) is enabled on all applicable ports and, when
enabled, if resources will be allocated to track and
report on DoS attack d… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.10 |
| ntnQosConfigDappMinTcpHdrSize DAPP minimum TCP header length allowed. Used when
performing TCP fragment validation. IPv4 TCP first
fragment packets will be dropped if the TCP header
(IP payload) is less than t… | scalar | Integer32 | .1.3.6.1.4.1.45.4.7.1.11.11 |
| ntnQosConfigDappIpv4IcmpMaxLength DAPP maximum IPv4 ICMP length. Used when performing
ICMP validation. IPv4 ICMP packets will be dropped
if the length (IP payload) exceeds this value. | scalar | Integer32 | .1.3.6.1.4.1.45.4.7.1.11.12 |
| ntnQosConfigDappIpv6IcmpMaxLength DAPP maximum IPv6 ICMP length. Used when performing
ICMP validation. IPv6 ICMP packets will be dropped
if the length exceeds this value. | scalar | Integer32 | .1.3.6.1.4.1.45.4.7.1.11.13 |
| ntnQosConfigNtApplicationMode Controls NT Application Mode processing. When enabled,
identified NT application traffic will be given preferential
treatment over non-NT application traffic. 'Mixed' mode
process… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.14 |
| ntnQosConfigQosOperMode Controls overall QoS processing for the system. When
enabled, all QoS functionality can be exercised by the
user. When disabled, installed QoS components are
temporarily removed … | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.15 |
| ntnQosConfigTrustedProcessingMode Controls filter usage related to Trusted interface
class processing on platforms using filters to support
treating traffic as trusted. A mode of 'partialDscpMapping(1)'
causes fil… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.16 |
| ntnQosConfigResetToPartialDefaults Most installed QoS policy state information can
be deleted and reset to the device's default state
by setting the value of this object to 'true(1)'.
QoS data that requires a sy… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.11.17 |
| ntnQosConfigClearStats All counters that are associated with QoS policies
are reset to zero by setting the value of this object
to 'true(1)'. The value 'false(2)' will always be
returned when queryin… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.11.18 |
| ntnQosConfigFcoeRedirOperMode Controls the FCoE redirection service for the system.
Enabling the service will initiate validation and
possible reservation of the resources that are required
for service activat… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.19 |
| ntnQosPolicyDeviceIdentTable This class contains a single policy rule instance that
contains device-specific information. | table | - | .1.3.6.1.4.1.45.4.7.1.11.2 |
| ntnQosConfigFcoeControllerMacAddr The 802 MAC address of the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection serv… | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.11.20 |
| ntnQosConfigFcoeRedirAvail Controls access to the FCoE Redirect functionality.
A value of 'accessible(1)' indicates that the FCoE
support can be accessed by an external FCoE Network
Controller (FNC). A valu… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.21 |
| ntnQosConfigFcoeControllerIfIndex The interface index of the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection serv… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.4.7.1.11.22 |
| ntnQosConfigFcoeControllerVlan The VLAN associated with the FCoE Network Controller
(FNC) that is used in conjunction with the FCoE
redirection service. Must be defined prior to
enabling the FCoE redirection se… | scalar | Integer32 | .1.3.6.1.4.1.45.4.7.1.11.23 |
| ntnQosConfigResetToDefaults All installed QoS policy state information can
be deleted and reset to the device's default
state by setting the value of this object to
'true(1)'. The value 'false(2)' will al… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.7.1.11.3 |
| ntnQosConfigNVCommitDelay Specifies the maximum amount of time, in seconds,
before non-volatile QoS configuration data will be
written to non-volatile storage. Delaying NV access
can be used to minimize fi… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.11.5 |
| ntnQosConfigDefaultQueueCfg The value of this attribute determines the queue
set that is associated with all egress interfaces
by default.
A queue set is characterized by the number of
queues in t… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.6 |
| ntnQosConfigDefaultBufferingCaps The value of this attribute determines the method
through which buffering resources are allocated to
ports sharing a pool of buffers.
The buffering resources associated… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.7 |
| ntnQosConfigUBPSupportLevel Determines whether QoS Agent User Based Policy
(UBP) support is enabled and, if so, what level
of support is enabled. Setting the value of this
attribute to 'ubpSupportDisabled(… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.8 |
| ntnQosConfigRoleAssocCompatLevel Determines whether interface role associations
are subject to loose or strict capabilities
verification. Setting the value of this attribute
to 'roleAssocCompatLoose(1)' means tha… | scalar | Enumeration | .1.3.6.1.4.1.45.4.7.1.11.9 |