nqaResultsSumCompletionTime2Low
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.4.1.1.9
Object
column
SNMPv2-SMICounter32
The low order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
Low/High order is defined where the binary number
will look as follows:
*************************************************
| High order 32 bits | Low order 32 bits |
*************************************************
For example the number 4294967296 would have all
Low order bits as '0' and the rightmost High
order bit will be 1 (zeros,1).
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.4.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nqaResultsEntry
- Table
- nqaResultsTable
- Siblings
- 44
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaResultsIndex The result table index and times of dispatching dependency tests.
Each test can only reserve 5 records. The result table only contains
icmp/dns/dlsw/lspPing/Traceroute/LSP Trace… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.1 |
| nqaResultsSumCompletionTime2High The high order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
See the nqaResultsSumComple… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.10 |
| nqaResultsCompletionTimeMin The minimum RTT (for Traceroute and LSP Traceroute,
it is the minimum RTT among all the packet of next hop) of all packets for executing a test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.11 |
| nqaResultsCompletionTimeMax The maximum RTT (for Traceroute and LSP Traceroute,
it is the maximum RTT among all the packets of next hop) of all packets in executing a test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.12 |
| nqaResultsDisconnects The times of consecutive failures. For connectionless protocol type of test, this number should be zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.13 |
| nqaResultsTimeouts The number of occasions when a NQA operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.14 |
| nqaResultsBusies The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.15 |
| nqaResultsNoConnections The number of occasions when a NQA operation could not be
initiated because the connection to the target has not
been established. For all other nqaAdminCtrlType this
object will… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.16 |
| nqaResultsSequenceErrors The number of NQA operation completions received with
an unexpected sequence identifier. For all other values
of nqaAdminCtrlType this object will remain zero.
Wh… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.17 |
| nqaResultsDrops The times probes of the test dropped due to sending or connecting failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.18 |
| nqaResultsAddressType The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.4.1.1.19 |
| nqaResultsHopIndex The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.2 |
| nqaResultsAddress The destination address (TraceRoute is the destination address of each hop,
and ping is the destination address of tests). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.4.1.1.20 |
| nqaResultsProbeResponses Number of responses received for the corresponding
test. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | responses SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.21 |
| nqaResultsSentProbes The value of this object reflects the number of probes sent
for the corresponding test.
The value of this object MUST be reported as 0 when no probes
have been sent. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.22 |
| nqaResultsLastGoodProbe Date and time when the last response was received for a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.4.1.1.23 |
| nqaResultsLastGoodPath The date and time when the last complete path was determined. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.4.1.1.24 |
| nqaResultsTestFinished The status of test execution. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.1.1.25 |
| nqaResultsRttAvg The average of RTTs that were successfully measured by tests. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.26 |
| nqaResultsLostPacketRatio The ratio of the packets lost to all packets sent in the test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.27 |
| nqaResultsRingResponseNode Ring response node ID, invalid value of 0. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.28 |
| nqaResultChangeRecord Records result change information for nqaResultsTestResultChangePackedNotification. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.4.1.1.29 |
| nqaResultsCompletions The status of test. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.1.1.3 |
| nqaResultsDetail Indicates detailed result information about the test instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.30 |
| nqaResultsChangeToFailureTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.31 |
| nqaResultsChangeToSuccessTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.32 |
| nqaResultsChangeToNoResultTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.33 |
| nqaResultsChangeToNegotiationFailureTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.34 |
| nqaResultsChangeToAbnormalTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.35 |
| nqaResultsFailureTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.36 |
| nqaResultsSuccessTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.37 |
| nqaResultsNoResultTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.38 |
| nqaResultsNegotiationFailureTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.39 |
| nqaResultsTestAttempts The times of executing tests, which includes the times of successful execution,
failed execution and interruption (interrupted by human or system).
The current number of test att… | column | tests SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.4 |
| nqaResultsAbnormalTimes Records result change information for nqaResultsTestResultChangeNotification. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.40 |
| nqaResultsLastCompletions The status of test. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.1.1.41 |
| nqaResultsTestType Test type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.1.1.42 |
| nqaResultsSourceIP Source IP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.4.1.1.43 |
| nqaResultsSourceIfName Source interface name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.4.1.1.44 |
| nqaResultsDestinationIP Destiation IP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.4.1.1.45 |
| nqaResultsCurHopCount It is equal to the hop count index executed
by current Traceroute or LSP Traceroute tests.
Ping/LSP Ping does not use this entry. The default value is 0. | column | hops SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.5 |
| nqaResultsCurProbeCount The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index. | column | probes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.6 |
| nqaResultsRTDOverThresholds The times of successful statistics test RTD (Round Trip Delay)
over the threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.7 |
| nqaResultsSumCompletionTime The sum of RTT (response time) of all packets of each hop for executing Traceroute,
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
lsp p… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.1.1.8 |