nqaResultsLastCompletions

NQA-MIB · .1.3.6.1.4.1.2011.5.25.111.4.1.1.41
MIB view Table view

Object

column Enumeration 
The status of test.

Context

MIB
NQA-MIB
OID
.1.3.6.1.4.1.2011.5.25.111.4.1.1.41
Type
column
Access
notifyonly
Status
current
Parent
nqaResultsEntry
Table
nqaResultsTable
Siblings
44

Syntax

Enumeration

Values & Constraints

Enumerated Values
0noResult
1success
2failure
3negotiateFailed
5abnormal
255init

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nqaResultsIndex
The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Trace…
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.1.1.1
nqaResultsSumCompletionTime2High
The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumComple…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.10
nqaResultsCompletionTimeMin
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.11
nqaResultsCompletionTimeMax
The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.12
nqaResultsDisconnects
The times of consecutive failures. For connectionless protocol type of test, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.13
nqaResultsTimeouts
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.14
nqaResultsBusies
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.15
nqaResultsNoConnections
The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.16
nqaResultsSequenceErrors
The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. Wh…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.17
nqaResultsDrops
The times probes of the test dropped due to sending or connecting failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.18
nqaResultsAddressType
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.4.1.1.19
nqaResultsHopIndex
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.1.1.2
nqaResultsAddress
The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests).
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.4.1.1.20
nqaResultsProbeResponses
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
columnresponses SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.21
nqaResultsSentProbes
The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
columnprobes SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.22
nqaResultsLastGoodProbe
Date and time when the last response was received for a probe.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.5.25.111.4.1.1.23
nqaResultsLastGoodPath
The date and time when the last complete path was determined.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.5.25.111.4.1.1.24
nqaResultsTestFinished
The status of test execution.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.1.1.25
nqaResultsRttAvg
The average of RTTs that were successfully measured by tests.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.26
nqaResultsLostPacketRatio
The ratio of the packets lost to all packets sent in the test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.27
nqaResultsRingResponseNode
Ring response node ID, invalid value of 0.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.28
nqaResultChangeRecord
Records result change information for nqaResultsTestResultChangePackedNotification.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.4.1.1.29
nqaResultsCompletions
The status of test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.1.1.3
nqaResultsDetail
Indicates detailed result information about the test instance.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.4.1.1.30
nqaResultsChangeToFailureTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.31
nqaResultsChangeToSuccessTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.32
nqaResultsChangeToNoResultTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.33
nqaResultsChangeToNegotiationFailureTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.34
nqaResultsChangeToAbnormalTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.35
nqaResultsFailureTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.36
nqaResultsSuccessTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.37
nqaResultsNoResultTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.38
nqaResultsNegotiationFailureTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.39
nqaResultsTestAttempts
The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test att…
columntests SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.4
nqaResultsAbnormalTimes
Records result change information for nqaResultsTestResultChangeNotification.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.40
nqaResultsTestType
Test type.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.1.1.42
nqaResultsSourceIP
Source IP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.4.1.1.43
nqaResultsSourceIfName
Source interface name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.4.1.1.44
nqaResultsDestinationIP
Destiation IP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.4.1.1.45
nqaResultsCurHopCount
It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.
columnhops SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.5
nqaResultsCurProbeCount
The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.
columnprobes SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.1.1.6
nqaResultsRTDOverThresholds
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.7
nqaResultsSumCompletionTime
The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp p…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.8
nqaResultsSumCompletionTime2Low
The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined wh…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.1.1.9