otuExpTTI
NORTEL-OME40G-FAC-MIB ·
.1.3.6.1.4.1.562.68.11.3.1.2.1.1.36
Object
column
RFC1213-MIBDisplayString
Expected incoming OTU TTI message. This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the facility.
Context
- MIB
- NORTEL-OME40G-FAC-MIB
- OID
.1.3.6.1.4.1.562.68.11.3.1.2.1.1.36- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nnOTMnEntry
- Table
- nnOTMnTable
- Siblings
- 50
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otmRowStatus Used to create/delete, put in service and out of
service, and edit. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.1 |
| txPathId Transmit path identifier | column | Integer32 | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.10 |
| oChTxPwr Provisioned output power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.11 |
| oChTxActOtmPwr Actual optical channel transmit power.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.12 |
| oChTxMinOtmPwr Minimum transmit power. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.13 |
| oChTxMaxOtmPwr Maximum transmit power. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.14 |
| oChRxActOtmPwr Actual receive power
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.15 |
| oChRxMinOtmPwr Minimum receive power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.16 |
| oChRxMaxOtmPwr Maximum receive power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.17 |
| oChTxWvlngthProv Provisioned transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.18 |
| oChTxWvlngthMin Minimum transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.19 |
| osid Optical Service ID | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.2 |
| oChTxWvlngthMax Maximum Transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.20 |
| oChTxWvlngthSpacing Transmit wavelength spacing | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.21 |
| oChRxActDisp Actual receive dispersion.
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.22 |
| oChRxActPmd Actual receive polarization mode dispersion (PMD)
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.23 |
| oChRxPmdMax Maximum receive PMD | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.24 |
| oChRxEchoTrace Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no dat… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.25 |
| oChTxTrace Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no dat… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.26 |
| oChTxAssocFarEndRx Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no dat… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.27 |
| otmPortMode | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.28 |
| tfMode Trace alarm mode | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.29 |
| otuTxFecFmt OTU transmit FEC format | column | FecFormat | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.3 |
| oduTfMode ODU trace alarm enable/disable | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.30 |
| otmLaserOffFarEndFail Always enabled in Release 5.1 | column | Status | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.31 |
| preFecSigFailThreshLevel Pre FEC Signal Fail Threshold Level | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.32 |
| otuSignalDegradeThreshLevel OTU Signal Degrade Threshold Level | column | Integer32 | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.33 |
| oduMonitorEnabled Beware of overloading ODUMONITOR in RTRV-TTI and
RTRV-OTM3 | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.34 |
| lineRate Line Rate to be specified at create time only. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.35 |
| otuRxIncTTI Receive OTU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.37 |
| oduRxIncTTI Receive ODU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.38 |
| oduMonitorMsg ODU monitoring message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.39 |
| otuRxFecFmt OTU receive FEC format | column | FecFormat | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.4 |
| otmLoopbackType Facility if loopback is active; otherwise, nothing is
returned for this attribute | column | LoopbackType | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.40 |
| opu2reserved YES/NO to using 7 overhead bytes for payload | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.41 |
| expectedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.42 |
| transmittedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.43 |
| receivedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used.
This variable is available upon GET-EXACT operations… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.44 |
| otmPrimaryState Primary State of the faciltiy. Can only be modified
by changing the admin state. | column | PrimaryState | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.45 |
| otmSecondaryState Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to … | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.46 |
| otmAdminState This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to O… | column | AdminState | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.47 |
| otmAID Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.48 |
| otmGCC A Get operation on this variable retrieves the
LLSDCC Carrier GCC value. Setting this variable to NONE
removes OSPF circuit and LLSDCC carrier info. It is
a NO-op if the GCC is … | column | GccValues | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.49 |
| oduTerm Indicates whether or not ODU TTI is terminated
on this OTMn facility. Possible values are
ODUTTITERM for OTM2 or ODUTERM for OTM3. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.5 |
| ospfCircuit With GET operations, this variable shall return the
configured parameters of the OSPF circuit. In this
release only the NETAREA is supported. With SET
operations, the NETAREA is … | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.50 |
| oChDifferentialEncoding | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.51 |
| otuTxTTI OTU transmit trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.6 |
| oduTxTTI ODU transmit trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.7 |
| otuRxExpTTI OTU receive trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.8 |
| oduRxExpTTI ODU receive trail trace identifer. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.9 |