ospfCircuit

NORTEL-OME40G-FAC-MIB · .1.3.6.1.4.1.562.68.11.3.1.2.1.1.50
MIB view Table view

Object

column r/w OctetString 
With GET operations, this variable shall return the
configured parameters of the OSPF circuit. In this
release only the NETAREA is supported. With SET 
operations, the NETAREA is to be supplied in the
format x.x.x.x. If no value is given, the default
(0.0.0.0) shall be used. All SET operations, whether
create or modify, will make sure that existing
OSPF circuits are deleted before creating or modifying
the new one with the new paramters (NETAREA). To delete
an OSPF circuit, set the GCC to none using the otmGCC
MIB variable.
This variable is available upon GET-EXACT only. No value
is shown for GET-NEXT operations.

Context

MIB
NORTEL-OME40G-FAC-MIB
OID
.1.3.6.1.4.1.562.68.11.3.1.2.1.1.50
Type
column
Access
readwrite
Status
current
Parent
nnOTMnEntry
Table
nnOTMnTable
Siblings
50

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-32

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
otmRowStatus
Used to create/delete, put in service and out of service, and edit.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.562.68.11.3.1.2.1.1.1
txPathId
Transmit path identifier
columnInteger32.1.3.6.1.4.1.562.68.11.3.1.2.1.1.10
oChTxPwr
Provisioned output power
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.11
oChTxActOtmPwr
Actual optical channel transmit power. This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.12
oChTxMinOtmPwr
Minimum transmit power.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.13
oChTxMaxOtmPwr
Maximum transmit power.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.14
oChRxActOtmPwr
Actual receive power This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.15
oChRxMinOtmPwr
Minimum receive power
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.16
oChRxMaxOtmPwr
Maximum receive power
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.17
oChTxWvlngthProv
Provisioned transmit wavelength
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.18
oChTxWvlngthMin
Minimum transmit wavelength
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.19
osid
Optical Service ID
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.2
oChTxWvlngthMax
Maximum Transmit wavelength
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.20
oChTxWvlngthSpacing
Transmit wavelength spacing
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.21
oChRxActDisp
Actual receive dispersion. Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.22
oChRxActPmd
Actual receive polarization mode dispersion (PMD) This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.23
oChRxPmdMax
Maximum receive PMD
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.24
oChRxEchoTrace
Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET request will get no dat…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.25
oChTxTrace
Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET request will get no dat…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.26
oChTxAssocFarEndRx
Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET request will get no dat…
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.27
otmPortModecolumnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.28
tfMode
Trace alarm mode
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.29
otuTxFecFmt
OTU transmit FEC format
columnFecFormat.1.3.6.1.4.1.562.68.11.3.1.2.1.1.3
oduTfMode
ODU trace alarm enable/disable
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.30
otmLaserOffFarEndFail
Always enabled in Release 5.1
columnStatus.1.3.6.1.4.1.562.68.11.3.1.2.1.1.31
preFecSigFailThreshLevel
Pre FEC Signal Fail Threshold Level
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.32
otuSignalDegradeThreshLevel
OTU Signal Degrade Threshold Level
columnInteger32.1.3.6.1.4.1.562.68.11.3.1.2.1.1.33
oduMonitorEnabled
Beware of overloading ODUMONITOR in RTRV-TTI and RTRV-OTM3
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.34
lineRate
Line Rate to be specified at create time only.
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.35
otuExpTTI
Expected incoming OTU TTI message. This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the facility.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.36
otuRxIncTTI
Receive OTU TTI message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the facility.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.37
oduRxIncTTI
Receive ODU TTI message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the facility.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.38
oduMonitorMsg
ODU monitoring message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the facility.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.39
otuRxFecFmt
OTU receive FEC format
columnFecFormat.1.3.6.1.4.1.562.68.11.3.1.2.1.1.4
otmLoopbackType
Facility if loopback is active; otherwise, nothing is returned for this attribute
columnLoopbackType.1.3.6.1.4.1.562.68.11.3.1.2.1.1.40
opu2reserved
YES/NO to using 7 overhead bytes for payload
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.41
expectedPayloadType
This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. For SET operations, the user can enter any valid HEX…
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.42
transmittedPayloadType
This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. For SET operations, the user can enter any valid HEX…
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.43
receivedPayloadType
This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. This variable is available upon GET-EXACT operations…
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.44
otmPrimaryState
Primary State of the faciltiy. Can only be modified by changing the admin state.
columnPrimaryState.1.3.6.1.4.1.562.68.11.3.1.2.1.1.45
otmSecondaryState
Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represented as a string to …
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.46
otmAdminState
This is a write-only variable. The user can restore or remove facilities using this command. You restore a facility by setting this variable to IS and remove it by setting it to O…
columnAdminState.1.3.6.1.4.1.562.68.11.3.1.2.1.1.47
otmAID
Facility AID as received from TL1. This should include the FAC type, shelf id, slot, and port.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.48
otmGCC
A Get operation on this variable retrieves the LLSDCC Carrier GCC value. Setting this variable to NONE removes OSPF circuit and LLSDCC carrier info. It is a NO-op if the GCC is …
columnGccValues.1.3.6.1.4.1.562.68.11.3.1.2.1.1.49
oduTerm
Indicates whether or not ODU TTI is terminated on this OTMn facility. Possible values are ODUTTITERM for OTM2 or ODUTERM for OTM3.
columnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.5
oChDifferentialEncodingcolumnEnumeration.1.3.6.1.4.1.562.68.11.3.1.2.1.1.51
otuTxTTI
OTU transmit trail trace identifier.
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.6
oduTxTTI
ODU transmit trail trace identifier.
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.7
otuRxExpTTI
OTU receive trail trace identifier.
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.8
oduRxExpTTI
ODU receive trail trace identifer.
columnOctetString.1.3.6.1.4.1.562.68.11.3.1.2.1.1.9