oChTxTrace
NORTEL-OME40G-FAC-MIB ·
.1.3.6.1.4.1.562.68.11.3.1.2.1.1.26
Object
column
RFC1213-MIBDisplayString
Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET request will get no data and GET-NEXT will return SP data (most likely UNKNOWN). When there is hardware, the GET-NEXT will still return SP data but the GET will get the actual reading from the hardware. This approach is necessary to make sure table views and index discoveries are not stalled on queries to the subtending cards.
Context
- MIB
- NORTEL-OME40G-FAC-MIB
- OID
.1.3.6.1.4.1.562.68.11.3.1.2.1.1.26- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nnOTMnEntry
- Table
- nnOTMnTable
- Siblings
- 50
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otmRowStatus Used to create/delete, put in service and out of
service, and edit. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.1 |
| txPathId Transmit path identifier | column | Integer32 | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.10 |
| oChTxPwr Provisioned output power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.11 |
| oChTxActOtmPwr Actual optical channel transmit power.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.12 |
| oChTxMinOtmPwr Minimum transmit power. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.13 |
| oChTxMaxOtmPwr Maximum transmit power. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.14 |
| oChRxActOtmPwr Actual receive power
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.15 |
| oChRxMinOtmPwr Minimum receive power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.16 |
| oChRxMaxOtmPwr Maximum receive power | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.17 |
| oChTxWvlngthProv Provisioned transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.18 |
| oChTxWvlngthMin Minimum transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.19 |
| osid Optical Service ID | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.2 |
| oChTxWvlngthMax Maximum Transmit wavelength | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.20 |
| oChTxWvlngthSpacing Transmit wavelength spacing | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.21 |
| oChRxActDisp Actual receive dispersion.
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.22 |
| oChRxActPmd Actual receive polarization mode dispersion (PMD)
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.23 |
| oChRxPmdMax Maximum receive PMD | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.24 |
| oChRxEchoTrace Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no dat… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.25 |
| oChTxAssocFarEndRx Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no dat… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.27 |
| otmPortMode | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.28 |
| tfMode Trace alarm mode | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.29 |
| otuTxFecFmt OTU transmit FEC format | column | FecFormat | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.3 |
| oduTfMode ODU trace alarm enable/disable | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.30 |
| otmLaserOffFarEndFail Always enabled in Release 5.1 | column | Status | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.31 |
| preFecSigFailThreshLevel Pre FEC Signal Fail Threshold Level | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.32 |
| otuSignalDegradeThreshLevel OTU Signal Degrade Threshold Level | column | Integer32 | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.33 |
| oduMonitorEnabled Beware of overloading ODUMONITOR in RTRV-TTI and
RTRV-OTM3 | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.34 |
| lineRate Line Rate to be specified at create time only. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.35 |
| otuExpTTI Expected incoming OTU TTI message.
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.36 |
| otuRxIncTTI Receive OTU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.37 |
| oduRxIncTTI Receive ODU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.38 |
| oduMonitorMsg ODU monitoring message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.39 |
| otuRxFecFmt OTU receive FEC format | column | FecFormat | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.4 |
| otmLoopbackType Facility if loopback is active; otherwise, nothing is
returned for this attribute | column | LoopbackType | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.40 |
| opu2reserved YES/NO to using 7 overhead bytes for payload | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.41 |
| expectedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.42 |
| transmittedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.43 |
| receivedPayloadType This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used.
This variable is available upon GET-EXACT operations… | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.44 |
| otmPrimaryState Primary State of the faciltiy. Can only be modified
by changing the admin state. | column | PrimaryState | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.45 |
| otmSecondaryState Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to … | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.46 |
| otmAdminState This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to O… | column | AdminState | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.47 |
| otmAID Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.48 |
| otmGCC A Get operation on this variable retrieves the
LLSDCC Carrier GCC value. Setting this variable to NONE
removes OSPF circuit and LLSDCC carrier info. It is
a NO-op if the GCC is … | column | GccValues | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.49 |
| oduTerm Indicates whether or not ODU TTI is terminated
on this OTMn facility. Possible values are
ODUTTITERM for OTM2 or ODUTERM for OTM3. | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.5 |
| ospfCircuit With GET operations, this variable shall return the
configured parameters of the OSPF circuit. In this
release only the NETAREA is supported. With SET
operations, the NETAREA is … | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.50 |
| oChDifferentialEncoding | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.51 |
| otuTxTTI OTU transmit trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.6 |
| oduTxTTI ODU transmit trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.7 |
| otuRxExpTTI OTU receive trail trace identifier. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.8 |
| oduRxExpTTI ODU receive trail trace identifer. | column | OctetString | .1.3.6.1.4.1.562.68.11.3.1.2.1.1.9 |