ntcAsiInAlarm

NEWTEC-ASIIN-MIB · .1.3.6.1.4.1.5835.5.2.800.1.9
MIB view Table view

Object

node 
Container holding ntcAsiInAlarm definitions.

Context

MIB
NEWTEC-ASIIN-MIB
OID
.1.3.6.1.4.1.5835.5.2.800.1.9
Type
node
Status
current
Parent
ntcAsiInObjects
Siblings
10
Children
9

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ntcAsiInInputSelection
Configuration of the ASI external input interface.
scalarEnumeration.1.3.6.1.4.1.5835.5.2.800.1.1
ntcAsiInInputTsBitRate
Displays the ASI interface input rate. Expressed in bps.
scalarbps SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5835.5.2.800.1.10
ntcAsiInNpRangeThr
Container holding ntcAsiInNpRangeThr definitions.
node-.1.3.6.1.4.1.5835.5.2.800.1.11
ntcAsiInActiveInput
Displays the active ASI input interface. When PRBS is selected it will indicate 'off'.
scalarEnumeration.1.3.6.1.4.1.5835.5.2.800.1.2
ntcAsiInInlineSplitter
Variable to configure the presence of an external in-line splitter with a given loss.
scalarEnumeration.1.3.6.1.4.1.5835.5.2.800.1.3
ntcAsiInMeasuredInputTsBitRate
Displays the measured ASI interface input rate in bps.
scalarbps SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5835.5.2.800.1.4
ntcAsiInInputFraming
Configuration of the ASI input framing type. - 188-byte packets - 204-byte packets (188 data bytes and 16 dummy bytes). Before transmission, these 16 bytes are ignored and replace…
scalarEnumeration.1.3.6.1.4.1.5835.5.2.800.1.5
ntcAsiInInputIfSwitchCount
Counts the number of times the device switched to another ASI input interface.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.5835.5.2.800.1.6
ntcAsiInPrbsGenerator
Container holding ntcAsiInPrbsGenerator definitions.
node-.1.3.6.1.4.1.5835.5.2.800.1.7
ntcAsiInPrbsMonitor
Container holding ntcAsiInPrbsMonitor definitions.
node-.1.3.6.1.4.1.5835.5.2.800.1.8
Child Objects
ObjectTypeSyntaxOID
ntcAsiInAlmGeneralAsiInput
This alarm is raised when there is a general ASI input alarm. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.1
ntcAsiInAlmNoInputSignal
This alarm is raised when no input signal is detected at the selected ASI input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.2
ntcAsiInAlmNoInputData
This alarm is raised when no input data is detected at the selected ASI input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.3
ntcAsiInAlmInvalidTsBitRate
This alarm is raised when the measured input Transport-Stream (TS) bitrate is higher or lower than the expected value. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.4
ntcAsiInAlmBufferOverflow
This alarm is raised when the input data buffer is full. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.5
ntcAsiInAlmNoInputSignalAsi1
This alarm is raised when no input signal is detected at the ASI1 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.6
ntcAsiInAlmNoInputSignalAsi2
This alarm is raised when no input signal is detected at the ASI2 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.7
ntcAsiInAlmNoInputDataAsi1
This alarm is raised when no input data is detected at the ASI1 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.8
ntcAsiInAlmNoInputDataAsi2
This alarm is raised when no input data is detected at the ASI2 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.9