ntcAsiInPrbsMonitor
NEWTEC-ASIIN-MIB ·
.1.3.6.1.4.1.5835.5.2.800.1.8
Object
node
Container holding ntcAsiInPrbsMonitor definitions.
Context
- MIB
- NEWTEC-ASIIN-MIB
- OID
.1.3.6.1.4.1.5835.5.2.800.1.8- Type
- node
- Status
- current
- Parent
- ntcAsiInObjects
- Siblings
- 10
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcAsiInInputSelection Configuration of the ASI external input interface. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.800.1.1 |
| ntcAsiInInputTsBitRate Displays the ASI interface input rate. Expressed in bps. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.800.1.10 |
| ntcAsiInNpRangeThr Container holding ntcAsiInNpRangeThr definitions. | node | - | .1.3.6.1.4.1.5835.5.2.800.1.11 |
| ntcAsiInActiveInput Displays the active ASI input interface. When PRBS is selected it will
indicate 'off'. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.800.1.2 |
| ntcAsiInInlineSplitter Variable to configure the presence of an external in-line splitter with a
given loss. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.800.1.3 |
| ntcAsiInMeasuredInputTsBitRate Displays the measured ASI interface input rate in bps. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.800.1.4 |
| ntcAsiInInputFraming Configuration of the ASI input framing type.
- 188-byte packets
- 204-byte packets (188 data bytes and 16 dummy bytes). Before transmission,
these 16 bytes are ignored and replace… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.800.1.5 |
| ntcAsiInInputIfSwitchCount Counts the number of times the device switched to another ASI input interface. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.800.1.6 |
| ntcAsiInPrbsGenerator Container holding ntcAsiInPrbsGenerator definitions. | node | - | .1.3.6.1.4.1.5835.5.2.800.1.7 |
| ntcAsiInAlarm Container holding ntcAsiInAlarm definitions. | node | - | .1.3.6.1.4.1.5835.5.2.800.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcAsiInPrbsMonEnable Enable or disable the PRBS monitoring. When monitoring is enabled the
statistics are displayed in the following parameters. | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.800.1.8.1 |
| ntcAsiInPrbsMonPidHandling Detect/filter out the PID inside data packets of the PRBS monitor. This is
reflected in the monitoring statistics. | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.800.1.8.2 |
| ntcAsiInPrbsMonPidValue Configuration of the PRBS monitor data packet PID value. | scalar | NEWTEC-TC-MIBNtcPid | .1.3.6.1.4.1.5835.5.2.800.1.8.3 |
| ntcAsiInPrbsMonState Displays the PRBS monitor status. Possible values are: Off, Unsync (no PRBS
sync) and PRBS (PRBS sync). | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.800.1.8.4 |
| ntcAsiInPrbsMonSyncSeconds Indicates how many seconds the PRBS monitor is synchronized to the PRBS
stream. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.800.1.8.5 |
| ntcAsiInPrbsMonErrorCount Number of errors detected in the PRBS stream. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.800.1.8.6 |
| ntcAsiInPrbsMonErrorRate Error rate detected in the PRBS stream. Float represented as unsigned integer
is scaled by a factor of 10. i.e. a value of 100 in SNMP means an error rate
of 10. | scalar | Unsigned32 | .1.3.6.1.4.1.5835.5.2.800.1.8.7 |
| ntcAsiInPrbsMonErrorRatio Displays the error ratio detected in the PRBS stream. | scalar | FLOAT-TC-MIBFloat32TC | .1.3.6.1.4.1.5835.5.2.800.1.8.8 |