ntcAsiInAlmNoInputDataAsi2

NEWTEC-ASIIN-MIB · .1.3.6.1.4.1.5835.5.2.800.1.9.9
MIB view Table view

Object

scalar NEWTEC-TC-MIBNtcAlarmState 
This alarm is raised when no input data is detected at the ASI2 input. This
variable indicates the current status of the alarm.

Context

MIB
NEWTEC-ASIIN-MIB
OID
.1.3.6.1.4.1.5835.5.2.800.1.9.9
Type
scalar
Access
readonly
Status
current
Parent
ntcAsiInAlarm
Siblings
8

Syntax

NEWTEC-TC-MIBNtcAlarmState
Source
NEWTEC-TC-MIBNtcAlarmState
Base type
Enumeration

Values & Constraints

Type Values
0off
1on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ntcAsiInAlmGeneralAsiInput
This alarm is raised when there is a general ASI input alarm. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.1
ntcAsiInAlmNoInputSignal
This alarm is raised when no input signal is detected at the selected ASI input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.2
ntcAsiInAlmNoInputData
This alarm is raised when no input data is detected at the selected ASI input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.3
ntcAsiInAlmInvalidTsBitRate
This alarm is raised when the measured input Transport-Stream (TS) bitrate is higher or lower than the expected value. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.4
ntcAsiInAlmBufferOverflow
This alarm is raised when the input data buffer is full. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.5
ntcAsiInAlmNoInputSignalAsi1
This alarm is raised when no input signal is detected at the ASI1 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.6
ntcAsiInAlmNoInputSignalAsi2
This alarm is raised when no input signal is detected at the ASI2 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.7
ntcAsiInAlmNoInputDataAsi1
This alarm is raised when no input data is detected at the ASI1 input. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.800.1.9.8