ethIfgProtectionStatus
NETI-ETH-MIB ·
.1.3.6.1.4.1.2928.2.2.1.3.10.1.7
Object
column
IfgProtectionStatus
The current protection state.
Context
- MIB
- NETI-ETH-MIB
- OID
.1.3.6.1.4.1.2928.2.2.1.3.10.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ethIfgEntry
- Table
- ethIfgTable
- Siblings
- 10
Syntax
IfgProtectionStatus
- Source
- IfgProtectionStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | unavailable |
2 | unprotected |
3 | standbyProtected |
4 | hitlessCapable |
5 | hitlessProtected |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethIfgRowStatus See SNMPv2-TC. The following values are supported:
active(1). The object always reads active.
createAndGo(4). A new conceptual row is created represe… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2928.2.2.1.3.10.1.1 |
| ethIfgActiveInterface The value of ethIfIndex of the interface from where frames
are currently being forwarded. If the ethIfgProtectionStatus
is `unavailable(1)' then the value is zero (0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.10.1.10 |
| ethIfgExpectChannel Controls whether a channel is expected to be terminated on
this ETS TTPs for the member interfaces or not. This value
can only be set if the mode (ethEtsMode) is multicast.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.10.1.11 |
| ethIfgMembers A list of the interfaces that are members of the interface
group. An interface is added or removed from an interface
group from the interface using ethIfInterfaceGroup. | column | InterfaceIndexList | .1.3.6.1.4.1.2928.2.2.1.3.10.1.2 |
| ethIfgDifferentialDelay The measured difference delay in microseconds between the
two channels in the interface group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.10.1.3 |
| ethIfgDifferentialDelayValid Specifies if the value of ethIfgDifferentialDelay is valid
or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.10.1.4 |
| ethIfgAheadInterface The value of ethIfIndex of the interface that is ahead of
the other. A value of zero (0) implies invalid, i.e. no
channel is established. If only one interface is a member
of th… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.10.1.5 |
| ethIfgHitlessProtection Specifies if hitless protection shall be attempted or not.
true(1). Will attempt to reach a hitless protection state.
false(2). Will only attempt t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2928.2.2.1.3.10.1.6 |
| ethIfgExpectedProtectionStatus The expected protection state. When the current protection
state (see ethIfgProtectionStatus) is lower than the
expected protection state, an alarm is raised. The alarm is
clear… | column | IfgProtectionStatus | .1.3.6.1.4.1.2928.2.2.1.3.10.1.8 |
| ethIfgForceHit A write of zero (0) resets the buffers, and will therefore
minimize the the latency penalty incurred by the 1+1
buffering. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2928.2.2.1.3.10.1.9 |