tftpSoftConfirm
NATEKS-MIB ·
.1.3.6.1.4.1.4249.2.6.1.10
Object
scalar
r/w
Enumeration
Writing softConfirm(1) to tftpSoftConfirm will confirm previously uploaded firmware. Read always returns readValue(2).
Context
- MIB
- NATEKS-MIB
- OID
.1.3.6.1.4.1.4249.2.6.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- tftp
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | softConfirm |
2 | readValue |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tftpServerIP The IP address of the server from which the file is loaded.
This value is not stored between device reboots and should
be set before each TFTP operation. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4249.2.6.1.1 |
| tftpProtocolVersion Allows protocol selection between tftp(1), ftp(2) and sftp(3) for up/download.
This value is not stored between device reboots and should
be set before each operation. | scalar | Enumeration | .1.3.6.1.4.1.4249.2.6.1.11 |
| tftpServerUserName The Username for Server access.
This value is not stored between device reboots and should
be set before each operation. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4249.2.6.1.12 |
| tftpServerUserPass The User Password for Server access.
This value is not stored between device reboots and should
be set before each operation. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4249.2.6.1.13 |
| tftpServerPortNumber The port number for accessing FTP or SFTP server.
This value is not stored between device reboots and should
be set before each operation. | scalar | Integer32 | .1.3.6.1.4.1.4249.2.6.1.14 |
| tftpSoftFileName The remote filename for firmware upgrade.
This value is not stored between device reboots and should
be set before each TFTP operation. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4249.2.6.1.2 |
| tftpConfFileName The remote filename for the up and download the startup-config.
This value is not stored between device reboots and should
be set before each TFTP operation. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4249.2.6.1.3 |
| tftpConnectionTimeout Time the device will wait for reply from TFTP server,
during connection and while transferring a block of data.
While waiting, the device will retransmit it's request
each 8 secon… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4249.2.6.1.4 |
| tftpNumRetries Number of times the device will retry to connect and perform
requested operation (firmware download, configuration up/download)
before stopping with error status. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4249.2.6.1.5 |
| tftpTransCmd This object, when read, always returns readValue(2).
Setting this object will initiate following actions:
swDownload(3)
Download the firmware from TFTP server, file… | scalar | Enumeration | .1.3.6.1.4.1.4249.2.6.1.6 |
| tftpLastOp This object returns the last executed maintenance operation,
regardless was it successful or not. It reports following actions:
noOp(1)
No maintenance operations were requeste… | scalar | Enumeration | .1.3.6.1.4.1.4249.2.6.1.7 |
| tftpTransferStatus Status of SNMP-initiated TFTP transfer. Results:
noOp(1)
Default, no TFTP operation was in progress.
connecting(2)
Device is connecting to the server specified by tftpServ… | scalar | Enumeration | .1.3.6.1.4.1.4249.2.6.1.8 |
| tftpLastOpTime The time in timeticks when last maintenance operation (TFTP software download or
configuration up/download) was executed from SNMP by setting tftpTransCmd.
If operation execution … | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4249.2.6.1.9 |