tftpConnectionTimeout

NATEKS-MIB · .1.3.6.1.4.1.4249.2.6.1.4
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Time the device will wait for reply from TFTP server,
during connection and while transferring a block of data.
While waiting, the device will retransmit it's request
each 8 seconds (typically). Thus it is reasonable to set
the timeout to a multiple of 8 seconds.
If during tftpConnectionTimeout device will not get a responce
from the server, current TFTP operation will be retried several
times (set by tftpNumRetries) before ending with and error.

Context

MIB
NATEKS-MIB
OID
.1.3.6.1.4.1.4249.2.6.1.4
Type
scalar
Access
readwrite
Status
current
Parent
tftp
Siblings
13

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tftpServerIP
The IP address of the server from which the file is loaded. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4249.2.6.1.1
tftpSoftConfirm
Writing softConfirm(1) to tftpSoftConfirm will confirm previously uploaded firmware. Read always returns readValue(2).
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.10
tftpProtocolVersion
Allows protocol selection between tftp(1), ftp(2) and sftp(3) for up/download. This value is not stored between device reboots and should be set before each operation.
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.11
tftpServerUserName
The Username for Server access. This value is not stored between device reboots and should be set before each operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.12
tftpServerUserPass
The User Password for Server access. This value is not stored between device reboots and should be set before each operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.13
tftpServerPortNumber
The port number for accessing FTP or SFTP server. This value is not stored between device reboots and should be set before each operation.
scalarInteger32.1.3.6.1.4.1.4249.2.6.1.14
tftpSoftFileName
The remote filename for firmware upgrade. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.2
tftpConfFileName
The remote filename for the up and download the startup-config. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.3
tftpNumRetries
Number of times the device will retry to connect and perform requested operation (firmware download, configuration up/download) before stopping with error status.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.6.1.5
tftpTransCmd
This object, when read, always returns readValue(2). Setting this object will initiate following actions: swDownload(3) Download the firmware from TFTP server, file…
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.6
tftpLastOp
This object returns the last executed maintenance operation, regardless was it successful or not. It reports following actions: noOp(1) No maintenance operations were requeste…
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.7
tftpTransferStatus
Status of SNMP-initiated TFTP transfer. Results: noOp(1) Default, no TFTP operation was in progress. connecting(2) Device is connecting to the server specified by tftpServ…
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.8
tftpLastOpTime
The time in timeticks when last maintenance operation (TFTP software download or configuration up/download) was executed from SNMP by setting tftpTransCmd. If operation execution …
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.4249.2.6.1.9