tftpLastOp

NATEKS-MIB · .1.3.6.1.4.1.4249.2.6.1.7
MIB view Table view

Object

scalar Enumeration 
This object returns the last executed maintenance operation,
regardless was it successful or not. It reports following actions:
noOp(1)
    No maintenance operations were requested since last restart of the device.
tftpSwDownload(3)
    Software download initiated from SNMP.
tftpConfigDownload(4)
    Startup-config download initiated from SNMP.
tftpConfigUpload(5)
    Startup-config upload initiated from SNMP.
otherSwDownload(6)
    Software download, either TFTP or any other way, not initiated from SNMP.
otherConfigDownload(7)
    Startup-config download, either TFTP or any other way, not initiated from SNMP.
otherConfigUpload(8)
    Startup-config upload, either TFTP or any other way, not initiated from SNMP.
sdSwUpload(9)
    Upload software from main flash to SD card
sdSwDownload(10)
    Download software from SD card
sdConfigUpload(11)
    Upload the startup-config from main flash to SD card
sdConfigDownload(12)
    Download the startup-config from SD card
sdLoaderUpload(13)
    Upload bootloader from main flash to SD card
sdLoaderDownload(14)
    Download bootloader from SD card
sdCreateSnapshot(15)
    Upload Software, Loader and startup-config to SD card.
    Create filesystem if necesary

Context

MIB
NATEKS-MIB
OID
.1.3.6.1.4.1.4249.2.6.1.7
Type
scalar
Access
readonly
Status
current
Parent
tftp
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
1noOp
3tftpSwDownload
4tftpConfigDownload
5tftpConfigUpload
6otherSwDownload
7otherConfigDownLoad
8otherConfigUpload
9sdSwUpload
10sdSwDownload
11sdConfigUpload
12sdConfigDownload
13sdLoaderUpload
14sdLoaderDownload
15sdCreateSnapshot

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tftpServerIP
The IP address of the server from which the file is loaded. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4249.2.6.1.1
tftpSoftConfirm
Writing softConfirm(1) to tftpSoftConfirm will confirm previously uploaded firmware. Read always returns readValue(2).
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.10
tftpProtocolVersion
Allows protocol selection between tftp(1), ftp(2) and sftp(3) for up/download. This value is not stored between device reboots and should be set before each operation.
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.11
tftpServerUserName
The Username for Server access. This value is not stored between device reboots and should be set before each operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.12
tftpServerUserPass
The User Password for Server access. This value is not stored between device reboots and should be set before each operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.13
tftpServerPortNumber
The port number for accessing FTP or SFTP server. This value is not stored between device reboots and should be set before each operation.
scalarInteger32.1.3.6.1.4.1.4249.2.6.1.14
tftpSoftFileName
The remote filename for firmware upgrade. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.2
tftpConfFileName
The remote filename for the up and download the startup-config. This value is not stored between device reboots and should be set before each TFTP operation.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4249.2.6.1.3
tftpConnectionTimeout
Time the device will wait for reply from TFTP server, during connection and while transferring a block of data. While waiting, the device will retransmit it's request each 8 secon…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.6.1.4
tftpNumRetries
Number of times the device will retry to connect and perform requested operation (firmware download, configuration up/download) before stopping with error status.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4249.2.6.1.5
tftpTransCmd
This object, when read, always returns readValue(2). Setting this object will initiate following actions: swDownload(3) Download the firmware from TFTP server, file…
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.6
tftpTransferStatus
Status of SNMP-initiated TFTP transfer. Results: noOp(1) Default, no TFTP operation was in progress. connecting(2) Device is connecting to the server specified by tftpServ…
scalarEnumeration.1.3.6.1.4.1.4249.2.6.1.8
tftpLastOpTime
The time in timeticks when last maintenance operation (TFTP software download or configuration up/download) was executed from SNMP by setting tftpTransCmd. If operation execution …
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.4249.2.6.1.9