r2ToneVariantsResetSpecific
MX-R2-MIB ·
.0.1875.1.100.600.1.2400
Object
column
r/w
Enumeration
Reset Specific
Resets specific settings of R2 Tones parameters with the
default country settings. This command is used to retrieve
the default country configuration set in the CountrySelection
parameter.
Context
- MIB
- MX-R2-MIB
- OID
.0.1875.1.100.600.1.2400- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- r2ToneVariantsEntry
- Table
- r2ToneVariantsTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | noOp |
10 | resetSpecific |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| r2ToneVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1875.1.100.600.1.100 |
| r2ToneVariantsBwdGroupASendCallingPartyCategory Backward Group A SendCallingPartyCategory Tone
Specifies the backward Group A tone sent when the backward
group requests the calling party category.
… | column | Enumeration | .0.1875.1.100.600.1.1000 |
| r2ToneVariantsBwdGroupAImmediateAccept Backward Group A ImmediateAccept Tone
Specifies the backward Group A tone sent when the backward
group accepts the call immediatly.
* None: No tone… | column | Enumeration | .0.1875.1.100.600.1.1100 |
| r2ToneVariantsBwdGroupASendDnisDigitNMinus2 Backward Group A BwdGroupASendDnisDigitNMinus2 Tone
Specifies the backward Group A tone used to request the
previous - 1 DNIS digit.
* None: No ton… | column | Enumeration | .0.1875.1.100.600.1.1200 |
| r2ToneVariantsBwdGroupASendDnisDigitNMinus3 Backward Group A BwdGroupASendDnisDigitNMinus3 Tone
Specifies the backward Group A tone used to request the
previous - 2 DNIS digit.
* None: No ton… | column | Enumeration | .0.1875.1.100.600.1.1300 |
| r2ToneVariantsBwdGroupARepeatAllDnis Backward Group A BwdGroupARepeatAllDnis Tone
Specifies the backward Group A tone used to request all DNIS
digits.
* None: No tone used.
* A1..A15… | column | Enumeration | .0.1875.1.100.600.1.1400 |
| r2ToneVariantsBwdGroupASendNextAniDigit Backward Group A BwdGroupASendNextAniDigit Tone
Specifies the backward Group A tone used to request the next
ANI digit.
* None: No tone used.
* A… | column | Enumeration | .0.1875.1.100.600.1.1500 |
| r2ToneVariantsBwdGroupASendCallingPartyCategorySwitchGroupC Backward Group A
BwdGroupASendCallingPartyCategorySwitchGroupC Tone
Specifies the backward Group A tone used to request the
calling party category and then switch t… | column | Enumeration | .0.1875.1.100.600.1.1550 |
| r2ToneVariantsBwdGroupBSendSit Backward Group B BwdGroupBSendSpecialToneInformation Tone
Specifies the backward Group B tone used to send a special
information tone.
* None: No t… | column | Enumeration | .0.1875.1.100.600.1.1600 |
| r2ToneVariantsBwdGroupBUserBusy Backward Group B BwdGroupBUserBusy Tone
Specifies the backward Group B tone used to signal a user
busy.
* None: No tone used.
* B1..B15: Group B … | column | Enumeration | .0.1875.1.100.600.1.1700 |
| r2ToneVariantsBwdGroupBNetworkCongestion Backward Group B BwdGroupBNetworkCongestion Tone
Specifies the backward Group B tone used to signal a network
congestion.
* None: No tone used.
*… | column | Enumeration | .0.1875.1.100.600.1.1800 |
| r2ToneVariantsBwdGroupBUnassignedNumber Backward Group B BwdGroupBUnassignedNumber Tone
Specifies the backward Group B tone used to signal an
unassigned number.
* None: No tone used.
* … | column | Enumeration | .0.1875.1.100.600.1.1900 |
| r2ToneVariantsBwdGroupBLineFreeCharge Backward Group B BwdGroupBLineFreeCharge Tone
Specifies the backward Group B tone used to signal that the
line is free and charge must be applied.
… | column | Enumeration | .0.1875.1.100.600.1.2000 |
| r2ToneVariantsBwdGroupBSupplementaryLineFreeCharge Backward Group B BwdGroupBSupplementaryLineFreeCharge Tone
Specifies a supplementary backward Group B tone used to
detect that the line is free and charge must be a… | column | Enumeration | .0.1875.1.100.600.1.2100 |
| r2ToneVariantsBwdGroupBLineFreeNoCharge Backward Group B BwdGroupBLineFreeNoCharge Tone
Specifies the backward Group B tone used to signal that the
line is free and no charges must be applied.
… | column | Enumeration | .0.1875.1.100.600.1.2200 |
| r2ToneVariantsBwdGroupBLineOutOfOrder Backward Group B BwdGroupBLineOutOfOrder Tone
Specifies the backward Group B tone used to signal that the
line is out of order.
* None: No tone use… | column | Enumeration | .0.1875.1.100.600.1.2300 |
| r2ToneVariantsBwdGroupBChangedNumber Backward Group B BwdGroupBChangedNumber Tone
Specifies the backward Group B tone used to signal that the
subscriber has changed number.
* None: No … | column | Enumeration | .0.1875.1.100.600.1.2350 |
| r2ToneVariantsBwdGroupCSendNextAniDigit Backward Group C BwdGroupCSendNextAniDigit Tone
Specifies the backward Group C tone used to request the next
ANI digit.
* None: No tone used.
* C… | column | Enumeration | .0.1875.1.100.600.1.2355 |
| r2ToneVariantsBwdGroupCRepeatAllDnisSwitchGroupA Backward Group C BwdCRepeatAllDnisSwitchGroupA Tone
Specifies the backward Group C tone used to request all DNIS
digits and then switch to Group A signals.
… | column | Enumeration | .0.1875.1.100.600.1.2360 |
| r2ToneVariantsBwdGroupCSendNextDnisDigitSwitchGroupA Backward Group C BwdCSendNextDnisDigitSwitchGroupA Tone
Specifies the backward Group C tone used to request the next
DNIS digit and then switch to Group A signals.
… | column | Enumeration | .0.1875.1.100.600.1.2365 |
| r2ToneVariantsBwdGroupCNetworkCongestion Backward Group C BwdGroupCNetworkCongestion Tone
Specifies the backward Group C tone used to signal a network
congestion.
* None: No tone used.
*… | column | Enumeration | .0.1875.1.100.600.1.2370 |
| r2ToneVariantsBwdGroupCSendPreviousDnisDigitSwitchGroupA Backward Group C BwdCSendPreviousDnisDigitSwitchGroupA Tone
Specifies the backward Group C tone used to request the
previous DNIS digit and then switch to Group A s… | column | Enumeration | .0.1875.1.100.600.1.2375 |
| r2ToneVariantsBwdGroupCSwitchGroupII Backward Group C BwdCSwitchGroupII Tone
Specifies the backward Group C tone used to request to the
caller a switch of Group II signals.
* None: No … | column | Enumeration | .0.1875.1.100.600.1.2380 |
| r2ToneVariantsOverrideDefault Override Default
Overrides the default setting of R2 tone variants for the
CountrySelection and InterfaceName.
* Disable: The interface uses the de… | column | MX-TCMxEnableState | .0.1875.1.100.600.1.300 |
| r2ToneVariantsFwdGroup1EndOfDnis Forward Group 1 EndOfDnis Tone
Specifies the forward Group 1 tone used to send after the
DNIS digits.
* None: No tone used.
* I1..I15: Group 1 fo… | column | Enumeration | .0.1875.1.100.600.1.400 |
| r2ToneVariantsFwdGroup1EndOfAni Forward Group 1 EndOfAni Tone
Specifies the forward Group 1 tone used to send after the ANI
digits.
* None: No tone used.
* I1..I15: Group 1 forw… | column | Enumeration | .0.1875.1.100.600.1.500 |
| r2ToneVariantsFwdGroup1RestrictedAni Forward Group 1 Restricted ANI Tone
Specifies the forward Group 1 tone used to reject a send next
digit (ANI). This tone is generally used in response to the
identi… | column | Enumeration | .0.1875.1.100.600.1.520 |
| r2ToneVariantsBwdGroupASendNextDnisDigit Backward Group A SendNextDnisDigit Tone
Specifies the backward Group A tone used to request the next
DNIS digit.
* None: No tone used.
* A1..A15:… | column | Enumeration | .0.1875.1.100.600.1.600 |
| r2ToneVariantsBwdGroupASendPreviousDnisDigit Backward Group A SendPreviousDnisDigit Tone
Specifies the backward Group A tone used to request the
previous DNIS digit.
* None: No tone used.
* … | column | Enumeration | .0.1875.1.100.600.1.700 |
| r2ToneVariantsBwdGroupASwitchToGroupII Backward Group A BwdGroupASwitchToGroupII Tone
Specifies the backward Group A tone used to request to the
caller a switch of Group II signals.
* No… | column | Enumeration | .0.1875.1.100.600.1.800 |
| r2ToneVariantsBwdGroupANetworkCongestion Backward Group A NetworkCongestion Tone
Specifies the backward Group A tone to be sent when a
congestion network is detected.
* None: No tone used.… | column | Enumeration | .0.1875.1.100.600.1.900 |