r2ToneVariantsBwdGroupBSupplementaryLineFreeCharge
MX-R2-MIB ·
.0.1875.1.100.600.1.2100
Object
column
r/w
Enumeration
Backward Group B BwdGroupBSupplementaryLineFreeCharge Tone
Specifies a supplementary backward Group B tone used to
detect that the line is free and charge must be applied. This
is a supplementary (optionnal) tone used on the reception
only.
* None: No tone used.
* B1..B15: Group B backward signal MF Tones
Context
- MIB
- MX-R2-MIB
- OID
.0.1875.1.100.600.1.2100- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- r2ToneVariantsEntry
- Table
- r2ToneVariantsTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
100 | none |
200 | b1 |
300 | b2 |
400 | b3 |
500 | b4 |
600 | b5 |
700 | b6 |
800 | b7 |
900 | b8 |
1000 | b9 |
1100 | b10 |
1200 | b11 |
1300 | b12 |
1400 | b13 |
1500 | b14 |
1600 | b15 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| r2ToneVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1875.1.100.600.1.100 |
| r2ToneVariantsBwdGroupASendCallingPartyCategory Backward Group A SendCallingPartyCategory Tone
Specifies the backward Group A tone sent when the backward
group requests the calling party category.
… | column | Enumeration | .0.1875.1.100.600.1.1000 |
| r2ToneVariantsBwdGroupAImmediateAccept Backward Group A ImmediateAccept Tone
Specifies the backward Group A tone sent when the backward
group accepts the call immediatly.
* None: No tone… | column | Enumeration | .0.1875.1.100.600.1.1100 |
| r2ToneVariantsBwdGroupASendDnisDigitNMinus2 Backward Group A BwdGroupASendDnisDigitNMinus2 Tone
Specifies the backward Group A tone used to request the
previous - 1 DNIS digit.
* None: No ton… | column | Enumeration | .0.1875.1.100.600.1.1200 |
| r2ToneVariantsBwdGroupASendDnisDigitNMinus3 Backward Group A BwdGroupASendDnisDigitNMinus3 Tone
Specifies the backward Group A tone used to request the
previous - 2 DNIS digit.
* None: No ton… | column | Enumeration | .0.1875.1.100.600.1.1300 |
| r2ToneVariantsBwdGroupARepeatAllDnis Backward Group A BwdGroupARepeatAllDnis Tone
Specifies the backward Group A tone used to request all DNIS
digits.
* None: No tone used.
* A1..A15… | column | Enumeration | .0.1875.1.100.600.1.1400 |
| r2ToneVariantsBwdGroupASendNextAniDigit Backward Group A BwdGroupASendNextAniDigit Tone
Specifies the backward Group A tone used to request the next
ANI digit.
* None: No tone used.
* A… | column | Enumeration | .0.1875.1.100.600.1.1500 |
| r2ToneVariantsBwdGroupASendCallingPartyCategorySwitchGroupC Backward Group A
BwdGroupASendCallingPartyCategorySwitchGroupC Tone
Specifies the backward Group A tone used to request the
calling party category and then switch t… | column | Enumeration | .0.1875.1.100.600.1.1550 |
| r2ToneVariantsBwdGroupBSendSit Backward Group B BwdGroupBSendSpecialToneInformation Tone
Specifies the backward Group B tone used to send a special
information tone.
* None: No t… | column | Enumeration | .0.1875.1.100.600.1.1600 |
| r2ToneVariantsBwdGroupBUserBusy Backward Group B BwdGroupBUserBusy Tone
Specifies the backward Group B tone used to signal a user
busy.
* None: No tone used.
* B1..B15: Group B … | column | Enumeration | .0.1875.1.100.600.1.1700 |
| r2ToneVariantsBwdGroupBNetworkCongestion Backward Group B BwdGroupBNetworkCongestion Tone
Specifies the backward Group B tone used to signal a network
congestion.
* None: No tone used.
*… | column | Enumeration | .0.1875.1.100.600.1.1800 |
| r2ToneVariantsBwdGroupBUnassignedNumber Backward Group B BwdGroupBUnassignedNumber Tone
Specifies the backward Group B tone used to signal an
unassigned number.
* None: No tone used.
* … | column | Enumeration | .0.1875.1.100.600.1.1900 |
| r2ToneVariantsBwdGroupBLineFreeCharge Backward Group B BwdGroupBLineFreeCharge Tone
Specifies the backward Group B tone used to signal that the
line is free and charge must be applied.
… | column | Enumeration | .0.1875.1.100.600.1.2000 |
| r2ToneVariantsBwdGroupBLineFreeNoCharge Backward Group B BwdGroupBLineFreeNoCharge Tone
Specifies the backward Group B tone used to signal that the
line is free and no charges must be applied.
… | column | Enumeration | .0.1875.1.100.600.1.2200 |
| r2ToneVariantsBwdGroupBLineOutOfOrder Backward Group B BwdGroupBLineOutOfOrder Tone
Specifies the backward Group B tone used to signal that the
line is out of order.
* None: No tone use… | column | Enumeration | .0.1875.1.100.600.1.2300 |
| r2ToneVariantsBwdGroupBChangedNumber Backward Group B BwdGroupBChangedNumber Tone
Specifies the backward Group B tone used to signal that the
subscriber has changed number.
* None: No … | column | Enumeration | .0.1875.1.100.600.1.2350 |
| r2ToneVariantsBwdGroupCSendNextAniDigit Backward Group C BwdGroupCSendNextAniDigit Tone
Specifies the backward Group C tone used to request the next
ANI digit.
* None: No tone used.
* C… | column | Enumeration | .0.1875.1.100.600.1.2355 |
| r2ToneVariantsBwdGroupCRepeatAllDnisSwitchGroupA Backward Group C BwdCRepeatAllDnisSwitchGroupA Tone
Specifies the backward Group C tone used to request all DNIS
digits and then switch to Group A signals.
… | column | Enumeration | .0.1875.1.100.600.1.2360 |
| r2ToneVariantsBwdGroupCSendNextDnisDigitSwitchGroupA Backward Group C BwdCSendNextDnisDigitSwitchGroupA Tone
Specifies the backward Group C tone used to request the next
DNIS digit and then switch to Group A signals.
… | column | Enumeration | .0.1875.1.100.600.1.2365 |
| r2ToneVariantsBwdGroupCNetworkCongestion Backward Group C BwdGroupCNetworkCongestion Tone
Specifies the backward Group C tone used to signal a network
congestion.
* None: No tone used.
*… | column | Enumeration | .0.1875.1.100.600.1.2370 |
| r2ToneVariantsBwdGroupCSendPreviousDnisDigitSwitchGroupA Backward Group C BwdCSendPreviousDnisDigitSwitchGroupA Tone
Specifies the backward Group C tone used to request the
previous DNIS digit and then switch to Group A s… | column | Enumeration | .0.1875.1.100.600.1.2375 |
| r2ToneVariantsBwdGroupCSwitchGroupII Backward Group C BwdCSwitchGroupII Tone
Specifies the backward Group C tone used to request to the
caller a switch of Group II signals.
* None: No … | column | Enumeration | .0.1875.1.100.600.1.2380 |
| r2ToneVariantsResetSpecific Reset Specific
Resets specific settings of R2 Tones parameters with the
default country settings. This command is used to retrieve
the default country configuration… | column | Enumeration | .0.1875.1.100.600.1.2400 |
| r2ToneVariantsOverrideDefault Override Default
Overrides the default setting of R2 tone variants for the
CountrySelection and InterfaceName.
* Disable: The interface uses the de… | column | MX-TCMxEnableState | .0.1875.1.100.600.1.300 |
| r2ToneVariantsFwdGroup1EndOfDnis Forward Group 1 EndOfDnis Tone
Specifies the forward Group 1 tone used to send after the
DNIS digits.
* None: No tone used.
* I1..I15: Group 1 fo… | column | Enumeration | .0.1875.1.100.600.1.400 |
| r2ToneVariantsFwdGroup1EndOfAni Forward Group 1 EndOfAni Tone
Specifies the forward Group 1 tone used to send after the ANI
digits.
* None: No tone used.
* I1..I15: Group 1 forw… | column | Enumeration | .0.1875.1.100.600.1.500 |
| r2ToneVariantsFwdGroup1RestrictedAni Forward Group 1 Restricted ANI Tone
Specifies the forward Group 1 tone used to reject a send next
digit (ANI). This tone is generally used in response to the
identi… | column | Enumeration | .0.1875.1.100.600.1.520 |
| r2ToneVariantsBwdGroupASendNextDnisDigit Backward Group A SendNextDnisDigit Tone
Specifies the backward Group A tone used to request the next
DNIS digit.
* None: No tone used.
* A1..A15:… | column | Enumeration | .0.1875.1.100.600.1.600 |
| r2ToneVariantsBwdGroupASendPreviousDnisDigit Backward Group A SendPreviousDnisDigit Tone
Specifies the backward Group A tone used to request the
previous DNIS digit.
* None: No tone used.
* … | column | Enumeration | .0.1875.1.100.600.1.700 |
| r2ToneVariantsBwdGroupASwitchToGroupII Backward Group A BwdGroupASwitchToGroupII Tone
Specifies the backward Group A tone used to request to the
caller a switch of Group II signals.
* No… | column | Enumeration | .0.1875.1.100.600.1.800 |
| r2ToneVariantsBwdGroupANetworkCongestion Backward Group A NetworkCongestion Tone
Specifies the backward Group A tone to be sent when a
congestion network is detected.
* None: No tone used.… | column | Enumeration | .0.1875.1.100.600.1.900 |