statsInfoNegativeFrameSlipsTransmitted
MX-HARDWARE-MIB ·
.0.40000.1.2000.1000.100.1.900
Object
column
SNMPv2-SMIUnsigned32
Negative Frame Slips Transmitted
A frame is skipped when the frequency of the transmit clock
is greater than the frequency of the transmit system
interface working clock (2.048 MHz on E1 or 1.544 MHz on T1).
This value is available on E1 and T1.
Context
- MIB
- MX-HARDWARE-MIB
- OID
.0.40000.1.2000.1000.100.1.900- Type
- column
- Access
- readonly
- Status
- current
- Parent
- statsInfoEntry
- Table
- statsInfoTable
- Siblings
- 17
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statsInfoPort Port
The name of the port. | column | OctetString | .0.40000.1.2000.1000.100.1.100 |
| statsInfoNegativeFrameSlipsReceived Negative Frame Slips Received
A frame is skipped when the frequency of the received route
clock is greater than the frequency of the receive system
interface workin… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1000 |
| statsInfoResetStats Reset Stats
Resets all statistics for the specified interface. | column | Enumeration | .0.40000.1.2000.1000.100.1.10000 |
| statsInfoPositiveFrameSlipsTransmitted Positive Frame Slips Transmitted
A frame is repeated when the frequency of the transmit clock
is less than the frequency of the transmit system interface
working cl… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1100 |
| statsInfoPositiveFrameSlipsReceived Positive Frame Slips Received
A frame is repeated when the frequency of the receive route
clock is less than the frequency of the receive system
interface working c… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1200 |
| statsInfoFramingErrors Framing Error
The framing error count indicates that a FAS (Frame Alignment
Signal) word has been received with an error.
The FAS-bits are present in… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1300 |
| statsInfoCodeViolations Code Violations
The code violations count indicates that an encoding error on
the PCM line has been detected.
This value is available on E1 and T1. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1400 |
| statsInfoCRCErrors CRC Errors
The CRC errors count is incremented when a multiframe has
been received with a CRC error.
On E1, this counter is only available with the C… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1500 |
| statsInfoEBitErrors E-Bit Error
The E-Bit error count gives information about the outgoing
transmit PCM line if the E-bits are used by the remote end
for submultiframe error indication… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1600 |
| statsInfoBlockErrors Block Error
The Block Error count is incremented once per multiframe if a
multiframe has been received with a CRC error or if a bad
frame alignment has been detecte… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1700 |
| statsInfoFramesTransmitted Frames Transmitted
Number of HDLC frames transmitted.
Note: Frames do not refer to the structure defined in I.431. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.200 |
| statsInfoFramesReceived Frames Received
Number of HDLC frames received.
Note: Frames do not refer to the structure defined in I.431. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.300 |
| statsInfoOctetsTransmitted Octets Transmitted
Number of octets transmitted. This value is obtained by
cumulating the octets transmitted in the HDLC frames.
Note: Frames do not … | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.400 |
| statsInfoOctetsReceived Octets Received
Number of octets received. This value is obtained by
cumulating the octets received in the HDLC frames.
Note: Frames do not refer to … | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.500 |
| statsInfoFcsErrors FCS Errors
Frame check sequence (FCS) errors indicate that frames of
data are being corrupted during transmission. FCS error count
is the number of frames that were… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.600 |
| statsInfoFramesDropped Frames Dropped
Number of frames dropped. This value is obtained by
cumulating the number of frames dropped when transferring
data from the framer chip to the device… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.700 |
| statsInfoOctetsDropped Octets Dropped
Number of octets dropped. This value is obtained by
cumulating the number of octets dropped when transferring
data from the framer chip to the device… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.800 |