statsInfoEBitErrors
MX-HARDWARE-MIB ·
.0.40000.1.2000.1000.100.1.1600
Object
column
SNMPv2-SMIUnsigned32
E-Bit Error
The E-Bit error count gives information about the outgoing
transmit PCM line if the E-bits are used by the remote end
for submultiframe error indication. Incrementing is only
possible in the multiframe synchronous state.
Due to signaling requirements, the E-bits of frame 13 and
frame 15 of the CRC multiframe can be used to indicate an
error in a received submultiframes:
* Submultiframe I status E-bit located in frame 13
* Submultiframe II status E-bit located in frame 15
* no CRC error: E = 1
* CRC error: E = 0
This value is only available in E1.
Context
- MIB
- MX-HARDWARE-MIB
- OID
.0.40000.1.2000.1000.100.1.1600- Type
- column
- Access
- readonly
- Status
- current
- Parent
- statsInfoEntry
- Table
- statsInfoTable
- Siblings
- 17
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statsInfoPort Port
The name of the port. | column | OctetString | .0.40000.1.2000.1000.100.1.100 |
| statsInfoNegativeFrameSlipsReceived Negative Frame Slips Received
A frame is skipped when the frequency of the received route
clock is greater than the frequency of the receive system
interface workin… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1000 |
| statsInfoResetStats Reset Stats
Resets all statistics for the specified interface. | column | Enumeration | .0.40000.1.2000.1000.100.1.10000 |
| statsInfoPositiveFrameSlipsTransmitted Positive Frame Slips Transmitted
A frame is repeated when the frequency of the transmit clock
is less than the frequency of the transmit system interface
working cl… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1100 |
| statsInfoPositiveFrameSlipsReceived Positive Frame Slips Received
A frame is repeated when the frequency of the receive route
clock is less than the frequency of the receive system
interface working c… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1200 |
| statsInfoFramingErrors Framing Error
The framing error count indicates that a FAS (Frame Alignment
Signal) word has been received with an error.
The FAS-bits are present in… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1300 |
| statsInfoCodeViolations Code Violations
The code violations count indicates that an encoding error on
the PCM line has been detected.
This value is available on E1 and T1. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1400 |
| statsInfoCRCErrors CRC Errors
The CRC errors count is incremented when a multiframe has
been received with a CRC error.
On E1, this counter is only available with the C… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1500 |
| statsInfoBlockErrors Block Error
The Block Error count is incremented once per multiframe if a
multiframe has been received with a CRC error or if a bad
frame alignment has been detecte… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.1700 |
| statsInfoFramesTransmitted Frames Transmitted
Number of HDLC frames transmitted.
Note: Frames do not refer to the structure defined in I.431. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.200 |
| statsInfoFramesReceived Frames Received
Number of HDLC frames received.
Note: Frames do not refer to the structure defined in I.431. | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.300 |
| statsInfoOctetsTransmitted Octets Transmitted
Number of octets transmitted. This value is obtained by
cumulating the octets transmitted in the HDLC frames.
Note: Frames do not … | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.400 |
| statsInfoOctetsReceived Octets Received
Number of octets received. This value is obtained by
cumulating the octets received in the HDLC frames.
Note: Frames do not refer to … | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.500 |
| statsInfoFcsErrors FCS Errors
Frame check sequence (FCS) errors indicate that frames of
data are being corrupted during transmission. FCS error count
is the number of frames that were… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.600 |
| statsInfoFramesDropped Frames Dropped
Number of frames dropped. This value is obtained by
cumulating the number of frames dropped when transferring
data from the framer chip to the device… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.700 |
| statsInfoOctetsDropped Octets Dropped
Number of octets dropped. This value is obtained by
cumulating the number of octets dropped when transferring
data from the framer chip to the device… | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.800 |
| statsInfoNegativeFrameSlipsTransmitted Negative Frame Slips Transmitted
A frame is skipped when the frequency of the transmit clock
is greater than the frequency of the transmit system
interface working … | column | SNMPv2-SMIUnsigned32 | .0.40000.1.2000.1000.100.1.900 |