mioxPleQbitFailures
MIOX25-MIB ·
.1.3.6.1.2.1.10.38.1.1.1.9
Object
The number of times a connection was closed because of a Q-bit failure.
Context
- MIB
- MIOX25-MIB
- OID
.1.3.6.1.2.1.10.38.1.1.1.9- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- mioxPleEntry
- Table
- mioxPleTable
- Siblings
- 15
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mioxPleMaxCircuits mandatory The maximum number of X.25 circuits that
can be open at one time for this interface.
A value of zero indicates the interface will
not allow any additional circuits (as it may
soon… | column | Integer32 | .1.3.6.1.2.1.10.38.1.1.1.1 |
| mioxPleQbitFailureRemoteAddress mandatory The remote address of the most recent
(last) connection that was closed because of
a Q-bit failure. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.1.1.1.10 |
| mioxPleQbitFailureTime mandatory The most recent value of sysUpTime when a
connection was closed because of a Q-bit
failure. This will also be the last time
that mioxPleQbitFailures was incremented. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.11 |
| mioxPleMinimumOpenTimer mandatory The minimum time in milliseconds this
interface will keep a connection open before
allowing it to be closed. A value of zero
indicates no timer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.12 |
| mioxPleInactivityTimer mandatory The amount of time time in milliseconds
this interface will keep an idle connection
open before closing it. A value of
2147483647 indicates no timer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.13 |
| mioxPleHoldDownTimer mandatory The hold down timer in milliseconds. This
is the minimum amount of time to wait before
trying another call to a host that was
previously unsuccessful. A value of
2147483647 indi… | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.14 |
| mioxPleCollisionRetryTimer mandatory The Collision Retry Timer in milliseconds.
The time to delay between call attempts when
the maximum number of circuits is exceeded
in a call attempt. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.15 |
| mioxPleDefaultPeerId mandatory This identifies the instance of the index
in the mioxPeerTable for the default
parameters to use with this interface.
The entry identified by this object may have
a… | column | - | .1.3.6.1.2.1.10.38.1.1.1.16 |
| mioxPleRefusedConnections mandatory The number of X.25 calls from a remote
systems to this system that were cleared by
this system. The interface instance should
identify the X.25 interface the call came in
on. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.2 |
| mioxPleEnAddrToX121LkupFlrs mandatory The number of times a translation from an
Encapsulated Address to an X.121 address
failed to find a corresponding X.121
address. Encapsulated addresses can be
looked up in the mi… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.3 |
| mioxPleLastFailedEnAddr mandatory The last Encapsulated address that failed
to find a corresponding X.121 address and
caused mioxPleEnAddrToX121LkupFlrs to be
incremented. The first octet of this object
contains … | column | OctetString | .1.3.6.1.2.1.10.38.1.1.1.4 |
| mioxPleEnAddrToX121LkupFlrTime mandatory The most recent value of sysUpTime when the
translation from an Encapsulated Address to
X.121 address failed to find a corresponding
X.121 address. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.5 |
| mioxPleX121ToEnAddrLkupFlrs mandatory The number of times the translation from an
X.121 address to an Encapsulated Address
failed to find a corresponding Encapsulated
Address. Addresses successfully re… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.6 |
| mioxPleLastFailedX121Address mandatory The last X.121 address that caused
mioxPleX121ToEnAddrLkupFlrs to increase. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.1.1.1.7 |
| mioxPleX121ToEnAddrLkupFlrTime mandatory The most recent value of sysUpTime when the
translation from an X.121 address to an
Encapsulated Address failed to find a
corresponding Encapsulated Address. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.8 |