mioxPleDefaultPeerId
MIOX25-MIB ·
.1.3.6.1.2.1.10.38.1.1.1.16
Object
column
mandatory
r/w
This identifies the instance of the index
in the mioxPeerTable for the default
parameters to use with this interface.
The entry identified by this object may have
a zero length Encapsulation address and a
zero length X.121 address.
These default parameters are used with
connections to hosts that do not have
entries in the mioxPeerTable. Such
connections occur when using ddn-x25 IP-X.25
address mapping or when accepting
connections from other hosts not in the
mioxPeerTable.
The mioxPeerEncTable entry with the same
index as the mioxPeerTable entry specifies
the call encapsulation types this PLE will
accept for peers not in the mioxPeerTable.
If the mioxPeerEncTable doesn't contain any
entries, this PLE will not accept calls from
entries not in the mioxPeerTable.
Context
- MIB
- MIOX25-MIB
- OID
.1.3.6.1.2.1.10.38.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- mioxPleEntry
- Table
- mioxPleTable
- Siblings
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mioxPleMaxCircuits mandatory The maximum number of X.25 circuits that
can be open at one time for this interface.
A value of zero indicates the interface will
not allow any additional circuits (as it may
soon… | column | Integer32 | .1.3.6.1.2.1.10.38.1.1.1.1 |
| mioxPleQbitFailureRemoteAddress mandatory The remote address of the most recent
(last) connection that was closed because of
a Q-bit failure. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.1.1.1.10 |
| mioxPleQbitFailureTime mandatory The most recent value of sysUpTime when a
connection was closed because of a Q-bit
failure. This will also be the last time
that mioxPleQbitFailures was incremented. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.11 |
| mioxPleMinimumOpenTimer mandatory The minimum time in milliseconds this
interface will keep a connection open before
allowing it to be closed. A value of zero
indicates no timer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.12 |
| mioxPleInactivityTimer mandatory The amount of time time in milliseconds
this interface will keep an idle connection
open before closing it. A value of
2147483647 indicates no timer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.13 |
| mioxPleHoldDownTimer mandatory The hold down timer in milliseconds. This
is the minimum amount of time to wait before
trying another call to a host that was
previously unsuccessful. A value of
2147483647 indi… | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.14 |
| mioxPleCollisionRetryTimer mandatory The Collision Retry Timer in milliseconds.
The time to delay between call attempts when
the maximum number of circuits is exceeded
in a call attempt. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.1.1.1.15 |
| mioxPleRefusedConnections mandatory The number of X.25 calls from a remote
systems to this system that were cleared by
this system. The interface instance should
identify the X.25 interface the call came in
on. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.2 |
| mioxPleEnAddrToX121LkupFlrs mandatory The number of times a translation from an
Encapsulated Address to an X.121 address
failed to find a corresponding X.121
address. Encapsulated addresses can be
looked up in the mi… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.3 |
| mioxPleLastFailedEnAddr mandatory The last Encapsulated address that failed
to find a corresponding X.121 address and
caused mioxPleEnAddrToX121LkupFlrs to be
incremented. The first octet of this object
contains … | column | OctetString | .1.3.6.1.2.1.10.38.1.1.1.4 |
| mioxPleEnAddrToX121LkupFlrTime mandatory The most recent value of sysUpTime when the
translation from an Encapsulated Address to
X.121 address failed to find a corresponding
X.121 address. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.5 |
| mioxPleX121ToEnAddrLkupFlrs mandatory The number of times the translation from an
X.121 address to an Encapsulated Address
failed to find a corresponding Encapsulated
Address. Addresses successfully re… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.6 |
| mioxPleLastFailedX121Address mandatory The last X.121 address that caused
mioxPleX121ToEnAddrLkupFlrs to increase. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.1.1.1.7 |
| mioxPleX121ToEnAddrLkupFlrTime mandatory The most recent value of sysUpTime when the
translation from an X.121 address to an
Encapsulated Address failed to find a
corresponding Encapsulated Address. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.38.1.1.1.8 |
| mioxPleQbitFailures mandatory The number of times a connection was closed
because of a Q-bit failure. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.1.1.1.9 |