mioxPeerEnAddr
MIOX25-MIB ·
.1.3.6.1.2.1.10.38.2.1.1.7
Object
column
mandatory
r/w
OctetString
The Encapsulation address of the remote
host mapped by this table entry. A length
of zero indicates the remote IP address is
unknown or unspecified for use as a PLE
default.
The first octet of this object contains the
encapsulation type, the remaining octets
contain an address of that type. Thus for
an IP address, the length will be five
octets, the first octet will contain 204
(hex CC), and the last four octets will
contain the IP address. For a snap
encapsulation, the first byte would be 128
(hex 80) and the rest of the octet string
would have the snap header.
Context
- MIB
- MIOX25-MIB
- OID
.1.3.6.1.2.1.10.38.2.1.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- mioxPeerEntry
- Table
- mioxPeerTable
- Siblings
- 9
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mioxPeerIndex mandatory An index value that distinguished one entry
from another. This index is independent of
any other index. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.1 |
| mioxPeerDescr mandatory This object returns any identification
information about the peer. An agent may
supply the comment information found in the
configuration file entry for this peer. A
zero length… | column | OctetString | .1.3.6.1.2.1.10.38.2.1.1.10 |
| mioxPeerStatus mandatory This reports the status of a peer entry.
A value of valid indicates a normal entry
that is in use by the agent. A value of
underCreation indicates a newly created
entry which isn… | column | Enumeration | .1.3.6.1.2.1.10.38.2.1.1.2 |
| mioxPeerMaxCircuits mandatory The maximum number of X.25 circuits allowed
to this peer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.3 |
| mioxPeerIfIndex mandatory The value of the ifIndex object for the
interface to X.25 to use to call the peer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.4 |
| mioxPeerConnectSeconds mandatory The number of seconds a call to this peer
was active. This counter will be
incremented by one for every second a
connection to a peer was open. If two calls
are o… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.38.2.1.1.5 |
| mioxPeerX25CallParamId mandatory The instance of the index object in the
x25CallParmTable from RFC 1382 for the X.25
call parameters used to communicate with the
remote host. The well known value {0 0}
indicates… | column | - | .1.3.6.1.2.1.10.38.2.1.1.6 |
| mioxPeerX121Address mandatory The X.25 address of the remote host mapped
by this table entry. A zero length string
indicates the X.25 address is unspecified
for use as the PLE default. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.2.1.1.8 |
| mioxPeerX25CircuitId mandatory This object identifies the instance of the
index for the X.25 circuit open to the peer
mapped by this table entry. The well known
value {0 0} indicates no connection
currently ac… | column | - | .1.3.6.1.2.1.10.38.2.1.1.9 |