mioxPeerConnectSeconds
MIOX25-MIB ·
.1.3.6.1.2.1.10.38.2.1.1.5
Object
The number of seconds a call to this peer
was active. This counter will be
incremented by one for every second a
connection to a peer was open. If two calls
are open at the same time, one second of
elapsed real time will results in two
seconds of connect time.
Context
- MIB
- MIOX25-MIB
- OID
.1.3.6.1.2.1.10.38.2.1.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- mioxPeerEntry
- Table
- mioxPeerTable
- Siblings
- 9
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mioxPeerIndex mandatory An index value that distinguished one entry
from another. This index is independent of
any other index. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.1 |
| mioxPeerDescr mandatory This object returns any identification
information about the peer. An agent may
supply the comment information found in the
configuration file entry for this peer. A
zero length… | column | OctetString | .1.3.6.1.2.1.10.38.2.1.1.10 |
| mioxPeerStatus mandatory This reports the status of a peer entry.
A value of valid indicates a normal entry
that is in use by the agent. A value of
underCreation indicates a newly created
entry which isn… | column | Enumeration | .1.3.6.1.2.1.10.38.2.1.1.2 |
| mioxPeerMaxCircuits mandatory The maximum number of X.25 circuits allowed
to this peer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.3 |
| mioxPeerIfIndex mandatory The value of the ifIndex object for the
interface to X.25 to use to call the peer. | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.38.2.1.1.4 |
| mioxPeerX25CallParamId mandatory The instance of the index object in the
x25CallParmTable from RFC 1382 for the X.25
call parameters used to communicate with the
remote host. The well known value {0 0}
indicates… | column | - | .1.3.6.1.2.1.10.38.2.1.1.6 |
| mioxPeerEnAddr mandatory The Encapsulation address of the remote
host mapped by this table entry. A length
of zero indicates the remote IP address is
unknown or unspecified for use as a PLE
default.
… | column | OctetString | .1.3.6.1.2.1.10.38.2.1.1.7 |
| mioxPeerX121Address mandatory The X.25 address of the remote host mapped
by this table entry. A zero length string
indicates the X.25 address is unspecified
for use as the PLE default. | column | RFC1382-MIBX121Address | .1.3.6.1.2.1.10.38.2.1.1.8 |
| mioxPeerX25CircuitId mandatory This object identifies the instance of the
index for the X.25 circuit open to the peer
mapped by this table entry. The well known
value {0 0} indicates no connection
currently ac… | column | - | .1.3.6.1.2.1.10.38.2.1.1.9 |