syncGroupSourceSwitch
LUM-SYNC-MIB ·
.1.3.6.1.4.1.8708.2.16.2.2.1.1.18
Object
column
LUM-TCCommandString
The command for performing a manual or forced sync source switch
as defined in ITU-T G.781:
- The manual switched source can be used to override the currently
selected source, on condition that the manual source is nominated in
the selection process, and it is not in Failed state. If the sync selection
process is running in Quality Level enabled mode, the manual switch source
must also have a Quality Level equal to or better than the currently selected
source.
- The forced switched source can be used to override the currently
selected source, on condition that the forced source is nominated in the
selection process and it is not in Failed State.
The forced source switch command overrides the manual switch command.
Context
- MIB
- LUM-SYNC-MIB
- OID
.1.3.6.1.4.1.8708.2.16.2.2.1.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- syncGroupEntry
- Table
- syncGroupTable
- Siblings
- 20
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| syncGroupIndex An arbitrary index assigned to each if entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.1 |
| syncGroupLocalOscActive Local oscillator used to synchronize trunc and clients
A: The sync is taken from the local sync source.
D: The sync is taken from the trunc or any of… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.10 |
| syncGroupAdminStatus Administrative state for the sync group.
down - Alarms are not sent.
up - The sync function is enabled
service - Alarms are not sent | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.11 |
| syncGroupOperStatus The operational state for the sync group.
notPresent - The physical resource is not
available.
down - The sync group is disabled.
up -… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.12 |
| syncGroupRingMode deprecated Decides whether sync group is part of a sync
ring or not.
off - Used when the muxponder is used as a
terminal multiplexor for point-to-point
connections, or as a hu… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.13 |
| syncGroupLastChangeTime The time when the sync selected sync source
changed the last time. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.16.2.2.1.1.14 |
| syncGroupManualSourceName The name of the sync source that the user
has selected to sync the trunk and the outgoing
(client) tributaries. Only applicable if
'manual' is used. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.15 |
| syncGroupConfigurationMode Decides the synchronization behaviour.
neverUseTrunc - Used when the muxponder is
used as a terminal multiplexor for point-to-point
connections, or as a hub-node in… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.16 |
| syncGroupStatus The status for the selected source.
normal - The selected source is not in holdover mode.
holdover - The selected source is in holdover (digital hold… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.17 |
| syncGroupSourceSwitchType Indication on what caused the currently selected source to be selected.
auto - The source was selected from a normal sync selection process
without any… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.19 |
| syncGroupName The name of the sync group. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.2 |
| syncGroupHoldover The sync group is in holdover mode.
A: The chosen sync source has gone into holdover (digital hold) mode,
or no source has been chosen.
D: A sync … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.20 |
| syncGroupQualityLevelSelectionMode Indicates wether the sync group is operating in Quality Level selection mode.
For Layer 2 ethernet boards, this attribute is dependant on the configuration
of the sync domain that… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.21 |
| syncGroupSubrack The subrack number for the group of interfaces. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.16.2.2.1.1.3 |
| syncGroupSlot The slot number for the group of interfaces. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.16.2.2.1.1.4 |
| syncGroupMode The sync mode for the sync group.
manual - Sync source is chosen manually.
auto - The sync source is chosen automatically. | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.5 |
| syncGroupManualSource The name of the sync source currently used
to sync the trunk. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.6 |
| syncGroupSelectedSource The name for the sync source currently used
to sync the trunk. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.7 |
| syncGroupQuality The sync quality that will be distributed to the
outgoing (client) tributaries. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.8 |
| syncGroupLocalOscActiveW2C deprecated Local oscillator used to sync clients.
A: The sync for clients is taken from the local
sync source.
D: The sync for clients is taken from the WDM
sig… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.9 |