syncGroupSlot
LUM-SYNC-MIB ·
.1.3.6.1.4.1.8708.2.16.2.2.1.1.4
Object
column
LUM-TCSlotNumber
The slot number for the group of interfaces.
Context
- MIB
- LUM-SYNC-MIB
- OID
.1.3.6.1.4.1.8708.2.16.2.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- syncGroupEntry
- Table
- syncGroupTable
- Siblings
- 20
Values & Constraints
Type Constraints
range: 0..22
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| syncGroupIndex An arbitrary index assigned to each if entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.1 |
| syncGroupLocalOscActive Local oscillator used to synchronize trunc and clients
A: The sync is taken from the local sync source.
D: The sync is taken from the trunc or any of… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.10 |
| syncGroupAdminStatus Administrative state for the sync group.
down - Alarms are not sent.
up - The sync function is enabled
service - Alarms are not sent | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.11 |
| syncGroupOperStatus The operational state for the sync group.
notPresent - The physical resource is not
available.
down - The sync group is disabled.
up -… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.12 |
| syncGroupRingMode deprecated Decides whether sync group is part of a sync
ring or not.
off - Used when the muxponder is used as a
terminal multiplexor for point-to-point
connections, or as a hu… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.13 |
| syncGroupLastChangeTime The time when the sync selected sync source
changed the last time. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.16.2.2.1.1.14 |
| syncGroupManualSourceName The name of the sync source that the user
has selected to sync the trunk and the outgoing
(client) tributaries. Only applicable if
'manual' is used. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.15 |
| syncGroupConfigurationMode Decides the synchronization behaviour.
neverUseTrunc - Used when the muxponder is
used as a terminal multiplexor for point-to-point
connections, or as a hub-node in… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.16 |
| syncGroupStatus The status for the selected source.
normal - The selected source is not in holdover mode.
holdover - The selected source is in holdover (digital hold… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.17 |
| syncGroupSourceSwitch The command for performing a manual or forced sync source switch
as defined in ITU-T G.781:
- The manual switched source can be used to override the currently
sel… | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.18 |
| syncGroupSourceSwitchType Indication on what caused the currently selected source to be selected.
auto - The source was selected from a normal sync selection process
without any… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.19 |
| syncGroupName The name of the sync group. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.2 |
| syncGroupHoldover The sync group is in holdover mode.
A: The chosen sync source has gone into holdover (digital hold) mode,
or no source has been chosen.
D: A sync … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.20 |
| syncGroupQualityLevelSelectionMode Indicates wether the sync group is operating in Quality Level selection mode.
For Layer 2 ethernet boards, this attribute is dependant on the configuration
of the sync domain that… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.21 |
| syncGroupSubrack The subrack number for the group of interfaces. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.16.2.2.1.1.3 |
| syncGroupMode The sync mode for the sync group.
manual - Sync source is chosen manually.
auto - The sync source is chosen automatically. | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.2.1.1.5 |
| syncGroupManualSource The name of the sync source currently used
to sync the trunk. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.6 |
| syncGroupSelectedSource The name for the sync source currently used
to sync the trunk. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.2.1.1.7 |
| syncGroupQuality The sync quality that will be distributed to the
outgoing (client) tributaries. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.2.1.1.8 |
| syncGroupLocalOscActiveW2C deprecated Local oscillator used to sync clients.
A: The sync for clients is taken from the local
sync source.
D: The sync for clients is taken from the WDM
sig… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.2.1.1.9 |