syncGroupRingMode

LUM-SYNC-MIB · .1.3.6.1.4.1.8708.2.16.2.2.1.1.13

Object

column deprecated r/w Enumeration

Decides whether sync group is part of a sync
ring or not.
              
off - Used when the muxponder is used as a
terminal multiplexor for point-to-point
connections, or as a hub-node in an SDH ring.
In this mode, the incoming trunc can never be
selected as synchronization source for the
outgoing trunc.
              
on - Used when the muxponder is used as an
add-drop muxFeeder in an SDH ring, i.e. some
AU4s are passed-through to the outgoing trunc.
In this mode, the outgoing S1 byte on the trunc
is set to the actual quality of the
synchronization function, even if the outgoing
trunc is synchronized by the incoming trunc.

Context

MIB: LUM-SYNC-MIB
OID: .1.3.6.1.4.1.8708.2.16.2.2.1.1.13
Type: column
Access: readwrite
Status: deprecated
Parent: syncGroupEntry
Table: syncGroupTable
Siblings: 20

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	off
`2`	on

Related Objects

Sibling Objects

Object	Type	Syntax	OID
syncGroupIndex An arbitrary index assigned to each if entry.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.1`
syncGroupLocalOscActive Local oscillator used to synchronize trunc and clients A: The sync is taken from the local sync source. D: The sync is taken from the trunc or any of…	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.10`
syncGroupAdminStatus Administrative state for the sync group. down - Alarms are not sent. up - The sync function is enabled service - Alarms are not sent	column	LUM-TCBoardOrInterfaceAdminStatus	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.11`
syncGroupOperStatus The operational state for the sync group. notPresent - The physical resource is not available. down - The sync group is disabled. up -…	column	LUM-TCBoardOrInterfaceOperStatus	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.12`
syncGroupLastChangeTime The time when the sync selected sync source changed the last time.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.14`
syncGroupManualSourceName The name of the sync source that the user has selected to sync the trunk and the outgoing (client) tributaries. Only applicable if 'manual' is used.	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.15`
syncGroupConfigurationMode Decides the synchronization behaviour. neverUseTrunc - Used when the muxponder is used as a terminal multiplexor for point-to-point connections, or as a hub-node in…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.16`
syncGroupStatus The status for the selected source. normal - The selected source is not in holdover mode. holdover - The selected source is in holdover (digital hold…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.17`
syncGroupSourceSwitch The command for performing a manual or forced sync source switch as defined in ITU-T G.781: - The manual switched source can be used to override the currently sel…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.18`
syncGroupSourceSwitchType Indication on what caused the currently selected source to be selected. auto - The source was selected from a normal sync selection process without any…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.19`
syncGroupName The name of the sync group.	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.2`
syncGroupHoldover The sync group is in holdover mode. A: The chosen sync source has gone into holdover (digital hold) mode, or no source has been chosen. D: A sync …	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.20`
syncGroupQualityLevelSelectionMode Indicates wether the sync group is operating in Quality Level selection mode. For Layer 2 ethernet boards, this attribute is dependant on the configuration of the sync domain that…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.21`
syncGroupSubrack The subrack number for the group of interfaces.	column	LUM-TCSubrackNumber	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.3`
syncGroupSlot The slot number for the group of interfaces.	column	LUM-TCSlotNumber	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.4`
syncGroupMode The sync mode for the sync group. manual - Sync source is chosen manually. auto - The sync source is chosen automatically.	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.5`
syncGroupManualSource The name of the sync source currently used to sync the trunk.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.6`
syncGroupSelectedSource The name for the sync source currently used to sync the trunk.	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.7`
syncGroupQuality The sync quality that will be distributed to the outgoing (client) tributaries.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.8`
syncGroupLocalOscActiveW2C deprecated Local oscillator used to sync clients. A: The sync for clients is taken from the local sync source. D: The sync for clients is taken from the WDM sig…	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.16.2.2.1.1.9`