softwareCuRepSupportedReplacements
LUM-SOFTWARE-MIB ·
.1.3.6.1.4.1.8708.2.28.2.8.8
Object
scalar
r/w
Enumeration
The types of control unit boards which should be supported as
replacements for the current main control unit.
The system will transfer the software packages for the board
types configured by this attribute to the traffic units. These
software packages will be used for automatic upgrade during CU
replacement.
If some SW packages needed by the control unit types
configured by this attribute cannot be distributed to a
traffic unit, alarms will be raised according to the cause:
a) Some software package(s) has not been downloaded:
a 'Replacement CU SW not downloaded' alarm will be raised.
b) Some software package(s) could not be distributed, e.g. due to
lack of free space on the traffic units:
a 'Replacement CU SW not distributed' alarm will be raised.
Allowed values:
all All compatible CU replacements supported
cuSfp Only replacement with a CU-SFP supported
cuSfpii Only replacement with a CU-SFP/II supported
cuSfpiii Only replacement with a CU-SFP/III supported
NOTE: Automatic upgrade is NEVER performed if the current
control unit or the replacement control unit is of type CU or
CU-OSC.
Context
- MIB
- LUM-SOFTWARE-MIB
- OID
.1.3.6.1.4.1.8708.2.28.2.8.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- softwareCuRep
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | all |
2 | cuSfp |
3 | cuSfpii |
4 | cuSfpiii |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| softwareCuRepAdminStatus The administrative state for the alarm.
down - No alarm will be rasied if SW packages are missing.
service - No alarm will be rasied if SW packages are missi… | scalar | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.28.2.8.1 |
| softwareCuRepUnSaved If the configuration is saved or not. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.28.2.8.2 |
| softwareCuRepSystemMode If dipswitch is changed or not. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.28.2.8.3 |
| softwareCuRepRebootCu If the CU should be rebooted or not. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.28.2.8.4 |
| softwareCuRepOkConfigure Configure an CU that has correct SW.
Run automatically when in CU replacement mode
when CU is an CU-SFP AND SW is correct.
Asks for the following:
Configuration not sav… | scalar | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.28.2.8.5 |
| softwareCuRepSwPackagesMissing Software package file(s) are missing on master CU.
When replacing or introducing CU or TU units some software
packages needs to be downloaded to the master CU in order … | scalar | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.28.2.8.6 |
| softwareCuRepSwNotDistributed Some SW package(s) needed to perform a CU replacement with
automatic upgrade are not transferred to a traffic unit. This
means that CU replacement with auto-upgrade will not work … | scalar | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.28.2.8.7 |