equipmentSubrackExpectedFirstPbSlot

LUM-EQUIPMENT-MIB · .1.3.6.1.4.1.8708.2.11.2.2.1.1.23
MIB view Table view

Object

column r/w FirstPbSlot 
The lowest slot number where it is possible to
configure a passive board. Automatically configured
to the actual value supported by hardware if the
hardware is present on subrack configuration.
              
If no hardware is present at configuration time,
this value is set to 'undefined' until changed by
the user. The 'undefined' value allows passive board
configuration in the same slots as the highest
possible firstPbSlot setting of the subrack type.

Context

MIB
LUM-EQUIPMENT-MIB
OID
.1.3.6.1.4.1.8708.2.11.2.2.1.1.23
Type
column
Access
readwrite
Status
current
Parent
equipmentSubrackEntry
Table
equipmentSubrackTable
Siblings
27

Syntax

FirstPbSlot
Source
FirstPbSlot
Base type
Enumeration

Values & Constraints

Type Values
0undefined
3slot3
4slot4
13slot13

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
equipmentSubrackIndex
An arbitrary index assigned to each subrack entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.11.2.2.1.1.1
equipmentSubrackUnexpectedType
A type of subrack not matching the expected type is present. A: A subrack with type different from the expected type is present (even if the subrack is not activate…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.10
equipmentSubrackTemp
The temperature in the subrack in 0.1 degrees centigrade.
columnInteger32.1.3.6.1.4.1.8708.2.11.2.2.1.1.11
equipmentSubrackTempHighExceeded
The threshold for environmental temperature in the subrack is exceeded. A: The temperature exceeds the associated threshold. D: Temperature is 0.5 de…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.12
equipmentSubrackTempThreshold
The threshold for temperature alarm in the subrack in 0.1 degrees centigrade.
columnInteger32.1.3.6.1.4.1.8708.2.11.2.2.1.1.13
equipmentSubrackDataChanged
The subrack data (dipswitches for subrackId and/or system mode) has been changed. Changing this data might affect the system behaviour after the next restart. A: Th…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.14
equipmentSubrackSystemModeSet
The value read from the system mode dipswitches at startup of the CU was diffrent from 0. This will affect the behaviour of the system. If the lowest…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.15
equipmentSubrackEffectiveSystemMode
The value of the system mode dipswitches read at startup. This value determines the system behaviour.
columnUnsigned32.1.3.6.1.4.1.8708.2.11.2.2.1.1.16
equipmentSubrackCurrentSystemMode
The current value of the system mode dipswitches. Will be used at the next restart.
columnUnsigned32.1.3.6.1.4.1.8708.2.11.2.2.1.1.17
equipmentSubrackAdminStatus
The administrative state of the subrack. down - This subrack should not be monitored. Suppresses alarms. up - The subrack should be monitored.
columnEnumeration.1.3.6.1.4.1.8708.2.11.2.2.1.1.18
equipmentSubrackOperStatus
The operational state of the subrack. notPresent - The subrack is not available. down - The subrack remains in the 'down'-state when adminStatus is s…
columnEnumeration.1.3.6.1.4.1.8708.2.11.2.2.1.1.19
equipmentSubrackName
The name of the subrack, for example 'sub1' where the number indicates the subrack number.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.11.2.2.1.1.2
equipmentSubrackObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.11.2.2.1.1.20
equipmentSubrackShelfLength
Length of the half-height slot divider shelf. To be manually entered by the user. A value of 0 is interpreted as 'not yet defined by user'.
columnUnsigned32.1.3.6.1.4.1.8708.2.11.2.2.1.1.21
equipmentSubrackLANModuleMissing
The subrack LAN/DCN module is missing. A(ctivation): LAN/DCN module disconnected from subrack for more than 2 seconds. D(e-activiation)…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.22
equipmentSubrackActualFirstPbSlot
The actual lowest slot number where it is possible to configure a passive board. When no subrack hardware is present, this value is 'undefined'.
columnFirstPbSlot.1.3.6.1.4.1.8708.2.11.2.2.1.1.24
equipmentSubrackFirstPbSlotMismatch
The expected first passive slot allows more passive boards than the hardware supports. A(ctivation): A subrack and control unit combination which su…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.25
equipmentSubrackAid
The access identifier (AID) of the product. The format is according to GR-833.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.11.2.2.1.1.26
equipmentSubrackPhysicalLocation
The Physical location of the product. The format is according to GR-833.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.11.2.2.1.1.27
equipmentSubrackChangeExpectedType
Command to change expected type, used when upgrading subrack to a new version, e.g TM3000 to TM3000/II
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.11.2.2.1.1.28
equipmentSubrackSubrack
The number of the subrack.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.11.2.2.1.1.3
equipmentSubrackDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.11.2.2.1.1.4
equipmentSubrackInvPhysIndexOrZero
The row in the invPhysTable for this subrack. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.11.2.2.1.1.5
equipmentSubrackAllFanUnitsFailed
All fan units in a subrack have failed. A(ctivation): fanUnitFailed active for all fans within a subrack. D(e-activiation): fanUnitFailed cleared for…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.6
equipmentSubrackRowStatus
SNMP administrivia. Manages creation and deletion of conceptual rows. See also SNMPv2-TC.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.8708.2.11.2.2.1.1.7
equipmentSubrackExpectedType
The expected subrack type.
columnEquipmentSubrackType.1.3.6.1.4.1.8708.2.11.2.2.1.1.8
equipmentSubrackActualType
The actual subrack type. If an unexpected subrack has been detected this variable can be used to see what type of subrack has been detected.
columnEquipmentSubrackType.1.3.6.1.4.1.8708.2.11.2.2.1.1.9