equipmentSubrackAllFanUnitsFailed
LUM-EQUIPMENT-MIB ·
.1.3.6.1.4.1.8708.2.11.2.2.1.1.6
Object
column
LUM-TCFaultStatus
All fan units in a subrack have failed.
A(ctivation): fanUnitFailed active for all fans
within a subrack.
D(e-activiation): fanUnitFailed cleared for one
fan unit.
Context
- MIB
- LUM-EQUIPMENT-MIB
- OID
.1.3.6.1.4.1.8708.2.11.2.2.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- equipmentSubrackEntry
- Table
- equipmentSubrackTable
- Siblings
- 27
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| equipmentSubrackIndex An arbitrary index assigned to each
subrack entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.1 |
| equipmentSubrackUnexpectedType A type of subrack not matching the expected
type is present.
A: A subrack with type different from the
expected type is present (even if the subrack
is not activate… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.10 |
| equipmentSubrackTemp The temperature in the subrack in 0.1 degrees centigrade. | column | Integer32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.11 |
| equipmentSubrackTempHighExceeded The threshold for environmental temperature
in the subrack is exceeded.
A: The temperature exceeds the associated threshold.
D: Temperature is 0.5 de… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.12 |
| equipmentSubrackTempThreshold The threshold for temperature alarm in the
subrack in 0.1 degrees centigrade. | column | Integer32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.13 |
| equipmentSubrackDataChanged The subrack data (dipswitches for subrackId and/or
system mode) has been changed. Changing this data might
affect the system behaviour after the next restart.
A: Th… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.14 |
| equipmentSubrackSystemModeSet The value read from the system mode
dipswitches at startup of the CU was
diffrent from 0.
This will affect the behaviour of the
system.
If the lowest… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.15 |
| equipmentSubrackEffectiveSystemMode The value of the system mode dipswitches
read at startup. This value determines the
system behaviour. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.16 |
| equipmentSubrackCurrentSystemMode The current value of the system mode
dipswitches. Will be used at the next
restart. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.17 |
| equipmentSubrackAdminStatus The administrative state of the subrack.
down - This subrack should not be monitored.
Suppresses alarms.
up - The subrack should be monitored. | column | Enumeration | .1.3.6.1.4.1.8708.2.11.2.2.1.1.18 |
| equipmentSubrackOperStatus The operational state of the subrack.
notPresent - The subrack is not available.
down - The subrack remains in the 'down'-state
when adminStatus is s… | column | Enumeration | .1.3.6.1.4.1.8708.2.11.2.2.1.1.19 |
| equipmentSubrackName The name of the subrack, for example 'sub1'
where the number indicates the subrack number. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.11.2.2.1.1.2 |
| equipmentSubrackObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.11.2.2.1.1.20 |
| equipmentSubrackShelfLength Length of the half-height slot divider shelf. To be
manually entered by the user. A value of 0 is
interpreted as 'not yet defined by user'. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.21 |
| equipmentSubrackLANModuleMissing The subrack LAN/DCN module is missing.
A(ctivation): LAN/DCN module disconnected from subrack
for more than 2 seconds.
D(e-activiation)… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.22 |
| equipmentSubrackExpectedFirstPbSlot The lowest slot number where it is possible to
configure a passive board. Automatically configured
to the actual value supported by hardware if the
hardware is present on subrack … | column | FirstPbSlot | .1.3.6.1.4.1.8708.2.11.2.2.1.1.23 |
| equipmentSubrackActualFirstPbSlot The actual lowest slot number where it is possible
to configure a passive board.
When no subrack hardware is present, this value is
'undefined'. | column | FirstPbSlot | .1.3.6.1.4.1.8708.2.11.2.2.1.1.24 |
| equipmentSubrackFirstPbSlotMismatch The expected first passive slot allows more passive
boards than the hardware supports.
A(ctivation): A subrack and control unit combination
which su… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.25 |
| equipmentSubrackAid The access identifier (AID) of the product.
The format is according to GR-833. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.11.2.2.1.1.26 |
| equipmentSubrackPhysicalLocation The Physical location of the product.
The format is according to GR-833. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.11.2.2.1.1.27 |
| equipmentSubrackChangeExpectedType Command to change expected type,
used when upgrading subrack to a new version,
e.g TM3000 to TM3000/II | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.11.2.2.1.1.28 |
| equipmentSubrackSubrack The number of the subrack. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.11.2.2.1.1.3 |
| equipmentSubrackDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.11.2.2.1.1.4 |
| equipmentSubrackInvPhysIndexOrZero The row in the invPhysTable for this subrack.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.11.2.2.1.1.5 |
| equipmentSubrackRowStatus SNMP administrivia.
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8708.2.11.2.2.1.1.7 |
| equipmentSubrackExpectedType The expected subrack type. | column | EquipmentSubrackType | .1.3.6.1.4.1.8708.2.11.2.2.1.1.8 |
| equipmentSubrackActualType The actual subrack type. If an unexpected
subrack has been detected this variable can be
used to see what type of subrack has been
detected. | column | EquipmentSubrackType | .1.3.6.1.4.1.8708.2.11.2.2.1.1.9 |