alarmGeneralHeartBeatInterval
LUM-ALARM-MIB ·
.1.3.6.1.4.1.8708.2.1.2.1.15
Object
scalar
r/w
Unsigned32
The interval (in minutes) with which the heartbeat notification (trap) from the node is sent. The first heartbeat notification is sent approx. one interval after the the function is enabled. To disable the heartbeat notification set the interval to 0.
Context
- MIB
- LUM-ALARM-MIB
- OID
.1.3.6.1.4.1.8708.2.1.2.1.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alarmGeneral
- Siblings
- 22
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-60
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmGeneralLastChangeTime The time when the alarm list was last changed. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.1 |
| alarmGeneralSuppressionMode Enables/disables suppression of alarms. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.1.2.1.10 |
| alarmGeneralFilterMode Enables/disables low-pass filtering of raising
and clearing of alarms. With filtering enabled
alarms must stay active/cleared for a certain time
before appearing in the alarm list. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.1.2.1.11 |
| alarmGeneralConfigLastChangeTime The time when the configuration of the MIB was
last changed. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.12 |
| alarmGeneralAlarmTableSize Number of rows available in the
alarm list. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.13 |
| alarmGeneralAlarmLogTableSize Number of rows available in the
alarm log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.14 |
| alarmGeneralAlarmLog2TableSize Number of rows available in the
alarm log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.16 |
| alarmGeneralAlarmNotificationVersion Sets which version of the alarm
notifications to use.
v1 - 'Classic'.
v2 - Node name and IP address appended to traps.
Note: Alarm trap version is not to be … | scalar | Enumeration | .1.3.6.1.4.1.8708.2.1.2.1.17 |
| alarmGeneralAlarmLog2Size The maximum number of alarm to be
stored in the alarm log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.18 |
| alarmGeneralHighestSeverity The current highest severity present among
the active alarms. | scalar | AlarmPerceivedSeverity | .1.3.6.1.4.1.8708.2.1.2.1.19 |
| alarmGeneralLogSize The number of recently cleared alarms kept in the
alarm log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.2 |
| alarmGeneralEventLogTableSize Number of rows available in the
event log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.20 |
| alarmGeneralEventLogSize The maximum number of events to be
stored in the event log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.21 |
| alarmGeneralEventLastSeqNumber The sequence number last used when creating
a new entry in the event log. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8708.2.1.2.1.22 |
| alarmGeneralSoakInInterval The interval (in minutes) with
which the interfaces in the node change
state from Auto In-Service to
In-Service after it expires.
To disable the Soak-in interval
set it to 0. Acce… | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.23 |
| alarmGeneralLastSeqNumber The sequence number last used when issuing
a notification. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8708.2.1.2.1.3 |
| alarmGeneralReplayBufferSize deprecated Note: Not supported!
The maximum number of alarm status changes
saved for re-play. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.4 |
| alarmGeneralReplayRequestSeq deprecated Note: Not supported!
Request re-play of the indicated last number of
changed status. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.5 |
| alarmGeneralReplayRequestTime deprecated Note: Not supported!
Request re-play of status changes that has occured
since the time indicated. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.6 |
| alarmGeneralTestAndIncr Note: Not supported!
Protection against simultaneous access from
multiple managers. See SNMPv2-TC. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.8708.2.1.2.1.7 |
| alarmGeneralMibSpecVersion Note: Not supported!
The MIB specification version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.1.2.1.8 |
| alarmGeneralMibImplVersion Note: Not supported!
The MIB implementation version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.1.2.1.9 |