alarmGeneralAlarmNotificationVersion
LUM-ALARM-MIB ·
.1.3.6.1.4.1.8708.2.1.2.1.17
Object
scalar
r/w
Enumeration
Sets which version of the alarm
notifications to use.
v1 - 'Classic'.
v2 - Node name and IP address appended to traps.
Note: Alarm trap version is not to be confused
with SNMP protocol versions. All traps from the
nodes are sent as SNMP v2c traps.
Note: The alarm related traps with node name
and IP address appended (v2) except for the
heartbeat-trap still uses the older (v1) trap
OIDs even though new trap OIDs have
been defined.
This is a bug but kept for compatibility reasons.
Context
- MIB
- LUM-ALARM-MIB
- OID
.1.3.6.1.4.1.8708.2.1.2.1.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- alarmGeneral
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | v1 |
2 | v2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmGeneralLastChangeTime The time when the alarm list was last changed. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.1 |
| alarmGeneralSuppressionMode Enables/disables suppression of alarms. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.1.2.1.10 |
| alarmGeneralFilterMode Enables/disables low-pass filtering of raising
and clearing of alarms. With filtering enabled
alarms must stay active/cleared for a certain time
before appearing in the alarm list. | scalar | Enumeration | .1.3.6.1.4.1.8708.2.1.2.1.11 |
| alarmGeneralConfigLastChangeTime The time when the configuration of the MIB was
last changed. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.12 |
| alarmGeneralAlarmTableSize Number of rows available in the
alarm list. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.13 |
| alarmGeneralAlarmLogTableSize Number of rows available in the
alarm log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.14 |
| alarmGeneralHeartBeatInterval The interval (in minutes) with
which the heartbeat notification
(trap) from the node is sent.
The first heartbeat notification
is sent approx. one interval after
the the function … | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.15 |
| alarmGeneralAlarmLog2TableSize Number of rows available in the
alarm log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.16 |
| alarmGeneralAlarmLog2Size The maximum number of alarm to be
stored in the alarm log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.18 |
| alarmGeneralHighestSeverity The current highest severity present among
the active alarms. | scalar | AlarmPerceivedSeverity | .1.3.6.1.4.1.8708.2.1.2.1.19 |
| alarmGeneralLogSize The number of recently cleared alarms kept in the
alarm log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.2 |
| alarmGeneralEventLogTableSize Number of rows available in the
event log. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.20 |
| alarmGeneralEventLogSize The maximum number of events to be
stored in the event log. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.21 |
| alarmGeneralEventLastSeqNumber The sequence number last used when creating
a new entry in the event log. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8708.2.1.2.1.22 |
| alarmGeneralSoakInInterval The interval (in minutes) with
which the interfaces in the node change
state from Auto In-Service to
In-Service after it expires.
To disable the Soak-in interval
set it to 0. Acce… | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.23 |
| alarmGeneralLastSeqNumber The sequence number last used when issuing
a notification. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8708.2.1.2.1.3 |
| alarmGeneralReplayBufferSize deprecated Note: Not supported!
The maximum number of alarm status changes
saved for re-play. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.4 |
| alarmGeneralReplayRequestSeq deprecated Note: Not supported!
Request re-play of the indicated last number of
changed status. | scalar | Unsigned32 | .1.3.6.1.4.1.8708.2.1.2.1.5 |
| alarmGeneralReplayRequestTime deprecated Note: Not supported!
Request re-play of status changes that has occured
since the time indicated. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.8708.2.1.2.1.6 |
| alarmGeneralTestAndIncr Note: Not supported!
Protection against simultaneous access from
multiple managers. See SNMPv2-TC. | scalar | SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.8708.2.1.2.1.7 |
| alarmGeneralMibSpecVersion Note: Not supported!
The MIB specification version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.1.2.1.8 |
| alarmGeneralMibImplVersion Note: Not supported!
The MIB implementation version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.1.2.1.9 |