alarmGeneralFilterMode

LUM-ALARM-MIB · .1.3.6.1.4.1.8708.2.1.2.1.11
MIB view Table view

Object

scalar Enumeration 
Enables/disables low-pass filtering of raising
and clearing of alarms. With filtering enabled
alarms must stay active/cleared for a certain time
before appearing in the alarm list.

Context

MIB
LUM-ALARM-MIB
OID
.1.3.6.1.4.1.8708.2.1.2.1.11
Type
scalar
Access
readonly
Status
current
Parent
alarmGeneral
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1off
2on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alarmGeneralLastChangeTime
The time when the alarm list was last changed.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.8708.2.1.2.1.1
alarmGeneralSuppressionMode
Enables/disables suppression of alarms.
scalarEnumeration.1.3.6.1.4.1.8708.2.1.2.1.10
alarmGeneralConfigLastChangeTime
The time when the configuration of the MIB was last changed.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.8708.2.1.2.1.12
alarmGeneralAlarmTableSize
Number of rows available in the alarm list.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.13
alarmGeneralAlarmLogTableSize
Number of rows available in the alarm log.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.14
alarmGeneralHeartBeatInterval
The interval (in minutes) with which the heartbeat notification (trap) from the node is sent. The first heartbeat notification is sent approx. one interval after the the function …
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.15
alarmGeneralAlarmLog2TableSize
Number of rows available in the alarm log.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.16
alarmGeneralAlarmNotificationVersion
Sets which version of the alarm notifications to use. v1 - 'Classic'. v2 - Node name and IP address appended to traps. Note: Alarm trap version is not to be …
scalarEnumeration.1.3.6.1.4.1.8708.2.1.2.1.17
alarmGeneralAlarmLog2Size
The maximum number of alarm to be stored in the alarm log.
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.18
alarmGeneralHighestSeverity
The current highest severity present among the active alarms.
scalarAlarmPerceivedSeverity.1.3.6.1.4.1.8708.2.1.2.1.19
alarmGeneralLogSize
The number of recently cleared alarms kept in the alarm log.
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.2
alarmGeneralEventLogTableSize
Number of rows available in the event log.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.20
alarmGeneralEventLogSize
The maximum number of events to be stored in the event log.
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.21
alarmGeneralEventLastSeqNumber
The sequence number last used when creating a new entry in the event log.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.8708.2.1.2.1.22
alarmGeneralSoakInInterval
The interval (in minutes) with which the interfaces in the node change state from Auto In-Service to In-Service after it expires. To disable the Soak-in interval set it to 0. Acce…
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.23
alarmGeneralLastSeqNumber
The sequence number last used when issuing a notification.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.8708.2.1.2.1.3
alarmGeneralReplayBufferSize deprecated
Note: Not supported! The maximum number of alarm status changes saved for re-play.
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.4
alarmGeneralReplayRequestSeq deprecated
Note: Not supported! Request re-play of the indicated last number of changed status.
scalarUnsigned32.1.3.6.1.4.1.8708.2.1.2.1.5
alarmGeneralReplayRequestTime deprecated
Note: Not supported! Request re-play of status changes that has occured since the time indicated.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.8708.2.1.2.1.6
alarmGeneralTestAndIncr
Note: Not supported! Protection against simultaneous access from multiple managers. See SNMPv2-TC.
scalarSNMPv2-TCTestAndIncr.1.3.6.1.4.1.8708.2.1.2.1.7
alarmGeneralMibSpecVersion
Note: Not supported! The MIB specification version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.1.2.1.8
alarmGeneralMibImplVersion
Note: Not supported! The MIB implementation version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.1.2.1.9