lgpPwrBatteryLifeEnhancer
LIEBERT-GP-POWER-MIB ·
.1.3.6.1.4.1.476.1.42.3.5.1.15
Object
scalar
Enumeration
The state of the battery life enhancer. When 'on', it will preserve battery life.
Context
- MIB
- LIEBERT-GP-POWER-MIB
- OID
.1.3.6.1.4.1.476.1.42.3.5.1.15- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- lgpPwrBattery
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lgpPwrNumberInstalledBatteryModules The number of battery modules installed in the device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.1 |
| lgpPwrBatteryFloatVoltage The battery float voltage of the system. | scalar | Volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.10 |
| lgpPwrBatteryEndOfDischargeVoltage The battery voltage threshold at which the batteries are considered
completely discharged. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.11 |
| lgpPwrAutomaticBatteryTestInterval The automatic battery test interval. | scalar | hours SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.12 |
| lgpPwrAutomaticBatteryTestCountdown The time remaining before the next battery test. | scalar | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.13 |
| lgpPwrBatteryChargeStatus The present state of the system's battery charge.
A value of 'charging' indicates the batteries are currently charging.
A value of 'discharging' indicates the batteries are curren… | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.14 |
| lgpPwrBatteryCharger The state of the battery charger. | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.16 |
| lgpPwrBatteryChargeMode The mode of the battery charger: 'float' charging or 'equalize'
charging. | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.17 |
| lgpPwrBatteryTimeRemaining An estimate of the time to battery charge depletion under the present
load conditions if the utility power is off and remains off, or if it
were to be lost and remain off.
… | scalar | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.18 |
| lgpPwrBatteryCapacity The present percentage of battery capacity. | scalar | percent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.19 |
| lgpPwrNumberFailedBatteryModules The number of battery modules in the device that have failed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.2 |
| lgpPwrBatteryCabinet This sub-tree contains items related to battery cabinets. | node | - | .1.3.6.1.4.1.476.1.42.3.5.1.20 |
| lgpPwrBatteryAmpHoursConsumed The cumulative battery Amp-hours withdrawn over the life of the
battery. This value persists across reboots. Typically, this value is
reset back to zero when the batteries are rep… | scalar | Amp-hour SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.21 |
| lgpPwrBatteryAmpHoursDischargeConsumed The battery Amp-hours withdrawn during the current/latest
discharge. This value does not persist across reboots. | scalar | Amp-hour SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.22 |
| lgpPwrBatteryLastDischargeTime The date and time of the last battery discharge. Typically this is the
time when the discharge starts. This value persists across reboots.
The date and time are determined in sec… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.476.1.42.3.5.1.23 |
| lgpPwrBatteryLastCommissionTime The date and time when the battery system was put into service.
This information persists across system reboot events. It is the
responsibility of Service to reset this date/time … | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.476.1.42.3.5.1.24 |
| lgpPwrBatteryPresentDischargeTime The total time spent on battery during the current or last discharge.
NOTE: While not discharging, some systems may display zero instead of
the last discharge. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.25 |
| lgpPwrBatteryCapacityStatus The indication of the capacity remaining in the UPS
system's batteries.
NOTE: In a single-module system, this point is intended to have the same
behavior as the RFC162… | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.26 |
| lgpPwrBatteryCircuitBreakerState The state of the Battery Circuit Breaker. | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.27 |
| lgpPwrNumberRedundantBatteryModules The number of redundant battery modules in the device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.3 |
| lgpPwrNumberActiveBatteryModules The number of active battery modules in the device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.4 |
| lgpPwrConfigLowBatteryWarningTime The value of the device's estimated minutes of remaining battery
at which a lgpEventLowBatteryWarning notification will be sent. | scalar | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.5 |
| lgpPwrNumberBatteryModuleWarnings The number of battery modules in the device that have a warning. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.6 |
| lgpPwrBatteryCount The number of batteries installed. | scalar | Count SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.7 |
| lgpPwrBatteryTestResult The outcome of the previous battery test. | scalar | Enumeration | .1.3.6.1.4.1.476.1.42.3.5.1.8 |
| lgpPwrNominalBatteryCapacity The nominal battery capacity of the system (in minutes) at full load. | scalar | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.476.1.42.3.5.1.9 |