lgpPwrBatteryLastCommissionTime

LIEBERT-GP-POWER-MIB · .1.3.6.1.4.1.476.1.42.3.5.1.24

Object

scalar r/w seconds SNMPv2-SMIUnsigned32

The date and time when the battery system was put into service.
This information persists across system reboot events. It is the
responsibility of Service to reset this date/time when the batteries
are replaced. The date and time are determined in seconds since the 
epoch on January 1, 1970.

Context

MIB: LIEBERT-GP-POWER-MIB
OID: .1.3.6.1.4.1.476.1.42.3.5.1.24
Type: scalar
Access: readwrite
Status: current
Units: seconds
Parent: lgpPwrBattery
Siblings: 26

Syntax

seconds SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lgpPwrNumberInstalledBatteryModules The number of battery modules installed in the device.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.1`
lgpPwrBatteryFloatVoltage The battery float voltage of the system.	scalar	Volt SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.10`
lgpPwrBatteryEndOfDischargeVoltage The battery voltage threshold at which the batteries are considered completely discharged.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.11`
lgpPwrAutomaticBatteryTestInterval The automatic battery test interval.	scalar	hours SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.12`
lgpPwrAutomaticBatteryTestCountdown The time remaining before the next battery test.	scalar	minutes SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.13`
lgpPwrBatteryChargeStatus The present state of the system's battery charge. A value of 'charging' indicates the batteries are currently charging. A value of 'discharging' indicates the batteries are curren…	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.14`
lgpPwrBatteryLifeEnhancer The state of the battery life enhancer. When 'on', it will preserve battery life.	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.15`
lgpPwrBatteryCharger The state of the battery charger.	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.16`
lgpPwrBatteryChargeMode The mode of the battery charger: 'float' charging or 'equalize' charging.	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.17`
lgpPwrBatteryTimeRemaining An estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off. …	scalar	minutes SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.18`
lgpPwrBatteryCapacity The present percentage of battery capacity.	scalar	percent SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.19`
lgpPwrNumberFailedBatteryModules The number of battery modules in the device that have failed.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.2`
lgpPwrBatteryCabinet This sub-tree contains items related to battery cabinets.	node	-	`.1.3.6.1.4.1.476.1.42.3.5.1.20`
lgpPwrBatteryAmpHoursConsumed The cumulative battery Amp-hours withdrawn over the life of the battery. This value persists across reboots. Typically, this value is reset back to zero when the batteries are rep…	scalar	Amp-hour SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.21`
lgpPwrBatteryAmpHoursDischargeConsumed The battery Amp-hours withdrawn during the current/latest discharge. This value does not persist across reboots.	scalar	Amp-hour SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.22`
lgpPwrBatteryLastDischargeTime The date and time of the last battery discharge. Typically this is the time when the discharge starts. This value persists across reboots. The date and time are determined in sec…	scalar	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.476.1.42.3.5.1.23`
lgpPwrBatteryPresentDischargeTime The total time spent on battery during the current or last discharge. NOTE: While not discharging, some systems may display zero instead of the last discharge.	scalar	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.25`
lgpPwrBatteryCapacityStatus The indication of the capacity remaining in the UPS system's batteries. NOTE: In a single-module system, this point is intended to have the same behavior as the RFC162…	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.26`
lgpPwrBatteryCircuitBreakerState The state of the Battery Circuit Breaker.	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.27`
lgpPwrNumberRedundantBatteryModules The number of redundant battery modules in the device.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.3`
lgpPwrNumberActiveBatteryModules The number of active battery modules in the device.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.4`
lgpPwrConfigLowBatteryWarningTime The value of the device's estimated minutes of remaining battery at which a lgpEventLowBatteryWarning notification will be sent.	scalar	minutes SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.5`
lgpPwrNumberBatteryModuleWarnings The number of battery modules in the device that have a warning.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.6`
lgpPwrBatteryCount The number of batteries installed.	scalar	Count SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.7`
lgpPwrBatteryTestResult The outcome of the previous battery test.	scalar	Enumeration	`.1.3.6.1.4.1.476.1.42.3.5.1.8`
lgpPwrNominalBatteryCapacity The nominal battery capacity of the system (in minutes) at full load.	scalar	minutes SNMPv2-SMIInteger32	`.1.3.6.1.4.1.476.1.42.3.5.1.9`