lcsEpsConfigInstanceProtectionType

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.23.3.2
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Range:0-1.
0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1.
1:Bidirectional: EPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.23.3.2
Type
scalar
Access
readwrite
Status
current
Parent
lcsEPSConfigInstanceEntry
Siblings
18

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lcsEpsStatusProtectingFlowState
OK: State of protecting flow is ok SF: State of protecting flow is Signal Fail SD: State of protecting flow is Signal Degrade (for future use)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.10
lcsEpsStatusTransmittedApsRequest
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.11
lcsEpsStatusTransmittedApsReSignal
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.12
lcsEpsStatusTransmittedApsBrSignal
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.13
lcsEpsStatusReceivedApsRequest
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.14
lcsEpsStatusReceivedApsReSignal
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.15
lcsEpsStatusReceivedApsBrSignal
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.16
lcsEpsStatusArchitectureMismatch
The architecture indicated in the received APS does not match the locally configured.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.17
lcsEpsStatusAPSOnWorking
APS is received on the working flow.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.18
lcsEpsStatusSwitchingIncomplete
Traffic is not selected from the same flow instance in the two ends.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.19
lcsEpsStatusNoApsReceived
APS PDU is not received from the other end.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.20
lcsEpsConfigInstanceAPS
Range:0-1. 0:disable 1:enable The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.3
lcsEpsConfigInstanceRevertive
Range:0-1. 0:disable 1:enable The revertive switching to working flow can be enabled/disabled.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.4
lcsEpsConfigInstanceWTRTime
The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.5
lcsEpsConfigInstanceHoldOffTime
The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.6
lcsEpsConfigInstanceCommand
0:None 1:Clear 2:Lock Out 3:Forced switch 4:Manual switch P 5:Manual switch W 6:Exercise 7:Freeze 8:Lock Out Local
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.7
lcsEpsStatusProtectionState
EPS state according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.8
lcsEpsStatusWorkingFlowState
OK: State of working flow is ok SF: State of working flow is Signal Fail SD: State of working flow is Signal Degrade (for future use)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.9