lcsEpsConfigInstanceHoldOffTime

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.23.3.6
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec).

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.23.3.6
Type
scalar
Access
readwrite
Status
current
Parent
lcsEPSConfigInstanceEntry
Siblings
18

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lcsEpsStatusProtectingFlowState
OK: State of protecting flow is ok SF: State of protecting flow is Signal Fail SD: State of protecting flow is Signal Degrade (for future use)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.10
lcsEpsStatusTransmittedApsRequest
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.11
lcsEpsStatusTransmittedApsReSignal
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.12
lcsEpsStatusTransmittedApsBrSignal
The transmitted APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.13
lcsEpsStatusReceivedApsRequest
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.14
lcsEpsStatusReceivedApsReSignal
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.15
lcsEpsStatusReceivedApsBrSignal
The received APS according to State Transition Tables in G.8031.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.16
lcsEpsStatusArchitectureMismatch
The architecture indicated in the received APS does not match the locally configured.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.17
lcsEpsStatusAPSOnWorking
APS is received on the working flow.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.18
lcsEpsStatusSwitchingIncomplete
Traffic is not selected from the same flow instance in the two ends.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.19
lcsEpsConfigInstanceProtectionType
Range:0-1. 0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1. 1:Bidirectional: EPS in the two e…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.2
lcsEpsStatusNoApsReceived
APS PDU is not received from the other end.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.20
lcsEpsConfigInstanceAPS
Range:0-1. 0:disable 1:enable The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.3
lcsEpsConfigInstanceRevertive
Range:0-1. 0:disable 1:enable The revertive switching to working flow can be enabled/disabled.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.4
lcsEpsConfigInstanceWTRTime
The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.5
lcsEpsConfigInstanceCommand
0:None 1:Clear 2:Lock Out 3:Forced switch 4:Manual switch P 5:Manual switch W 6:Exercise 7:Freeze 8:Lock Out Local
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.23.3.7
lcsEpsStatusProtectionState
EPS state according to State Transition Tables in G.8031.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.8
lcsEpsStatusWorkingFlowState
OK: State of working flow is ok SF: State of working flow is Signal Fail SD: State of working flow is Signal Degrade (for future use)
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.23.3.9