lcsEpsConfigInstanceCommand
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.23.3.7
Object
0:None 1:Clear 2:Lock Out 3:Forced switch 4:Manual switch P 5:Manual switch W 6:Exercise 7:Freeze 8:Lock Out Local
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.23.3.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- lcsEPSConfigInstanceEntry
- Siblings
- 18
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsEpsStatusProtectingFlowState OK: State of protecting flow is ok
SF: State of protecting flow is Signal Fail
SD: State of protecting flow is Signal Degrade (for future use) | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.10 |
| lcsEpsStatusTransmittedApsRequest The transmitted APS according to State Transition Tables in G.8031. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.11 |
| lcsEpsStatusTransmittedApsReSignal The transmitted APS according to State Transition Tables in G.8031. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.12 |
| lcsEpsStatusTransmittedApsBrSignal The transmitted APS according to State Transition Tables in G.8031. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.13 |
| lcsEpsStatusReceivedApsRequest The received APS according to State Transition Tables in G.8031. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.14 |
| lcsEpsStatusReceivedApsReSignal The received APS according to State Transition Tables in G.8031. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.15 |
| lcsEpsStatusReceivedApsBrSignal The received APS according to State Transition Tables in G.8031. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.16 |
| lcsEpsStatusArchitectureMismatch The architecture indicated in the received APS does not match the locally configured. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.17 |
| lcsEpsStatusAPSOnWorking APS is received on the working flow. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.18 |
| lcsEpsStatusSwitchingIncomplete Traffic is not selected from the same flow instance in the two ends. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.19 |
| lcsEpsConfigInstanceProtectionType Range:0-1.
0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1.
1:Bidirectional: EPS in the two e… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.2 |
| lcsEpsStatusNoApsReceived APS PDU is not received from the other end. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.20 |
| lcsEpsConfigInstanceAPS Range:0-1.
0:disable
1:enable
The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.3 |
| lcsEpsConfigInstanceRevertive Range:0-1.
0:disable
1:enable
The revertive switching to working flow can be enabled/disabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.4 |
| lcsEpsConfigInstanceWTRTime The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.5 |
| lcsEpsConfigInstanceHoldOffTime The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.23.3.6 |
| lcsEpsStatusProtectionState EPS state according to State Transition Tables in G.8031. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.8 |
| lcsEpsStatusWorkingFlowState OK: State of working flow is ok
SF: State of working flow is Signal Fail
SD: State of working flow is Signal Degrade (for future use) | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.23.3.9 |