slcDevIntModemDialbackDelay

LANTRONIX-SLC-MIB · .1.3.6.1.4.1.244.1.1.4.6.14
MIB view Table view

Object

scalar seconds SNMPv2-SMIInteger32 
When slcDevIntModemModemState is set to dialback, 
specifies the delay between the dial-in and dial-out portion 
of the dialing sequence.

Context

MIB
LANTRONIX-SLC-MIB
OID
.1.3.6.1.4.1.244.1.1.4.6.14
Type
scalar
Access
readonly
Status
current
Units
seconds
Parent
slcDevIntModem
Siblings
21

Syntax

seconds SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slcDevIntModemModemState
For the SLC internal modem, indicates how the modem will be used.
scalarEnumeration.1.3.6.1.4.1.244.1.1.4.6.1
slcDevIntModemDialoutLogin
The login to use for dial-out connections.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.10
slcDevIntModemDialbackMode
For dial-back connections, defines the phone number to call: a number associated with the authenticated user, or a fixed number associated with the internal modem.
scalarEnumeration.1.3.6.1.4.1.244.1.1.4.6.11
slcDevIntModemDialbackNum
The phone number to use for dial-back connections.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.12
slcDevIntModemDialbackRetries
When slcDevIntModemModemState is set to dialback, specifies the number of times the SLC will retry the dial-out portion of the dialing sequence if the first attempt to dial-out…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.6.13
slcDevIntModemCallerIdLogging
If enabled, caller id logging is enabled for a modem dial-in connection.
scalarEnabledState.1.3.6.1.4.1.244.1.1.4.6.15
slcDevIntModemCallerIdATCmd
The modem AT command required to initiate caller id logging by the modem.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.16
slcDevIntModemUseSites
If enabled, sites (a set of site-oriented modem parameters that can be activated by various modem-related events such as authentication, outbound traffic for Dial-on-demand con…
scalarEnabledState.1.3.6.1.4.1.244.1.1.4.6.17
slcDevIntModemGroup
The group or groups that may access the internal modem connection.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.18
slcDevIntModemIdleTimeout
The timeout (in seconds) for dial-in and dial-on-demand PPP connections. If no traffic is received for the PPP connection in the time defined by the idle timeout, the PPP conne…
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.6.19
slcDevIntModemModemMode
For the SLC internal modem, the mode: PPP (for Dial-in and Dial-out) and text (for Dial-in and Dial-back).
scalarEnumeration.1.3.6.1.4.1.244.1.1.4.6.2
slcDevIntModemRestartDelay
The delay (in seconds) to wait before restarting dial-out or dial-on-demand PPP connections.
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.244.1.1.4.6.20
slcDevIntModemNATState
If enabled, use NAT (Network Address Translation) to allow dial-in and dial-back users to access the network connected to Eth1 and Eth2.
scalarEnabledState.1.3.6.1.4.1.244.1.1.4.6.21
slcDevIntModemDialtoneCheck
The time (in minutes) between checks for a modem dialtone. A value of 0 indicates that dialtone checks are disabled.
scalarminutes Integer32.1.3.6.1.4.1.244.1.1.4.6.22
slcDevIntModemLocalIP
For PPP connections, the local IP Address - all zeros if it should be negotiated.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.6.3
slcDevIntModemRemoteIP
For PPP connections, the remote IP Address - all zeros if it should be negotiated.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.4.6.4
slcDevIntModemAuth
For PPP connections, the type of authentication to be used.
scalarEnumeration.1.3.6.1.4.1.244.1.1.4.6.5
slcDevIntModemCHAPHost
For PPP connections with CHAP authentication, the host (for Unix) or user (for Windows) to use.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.6
slcDevIntModemInitScript
The initialization script for an internal modem.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.7
slcDevIntModemTimeout
The timeout (in minutes) for text connections. A value of 0 indicates that timeouts are disabled.
scalarminutes Integer32.1.3.6.1.4.1.244.1.1.4.6.8
slcDevIntModemDialoutNum
The phone number to use for dial-out connections.
scalarOctetString.1.3.6.1.4.1.244.1.1.4.6.9