slcDevIntModemCallerIdATCmd
LANTRONIX-SLC-MIB ·
.1.3.6.1.4.1.244.1.1.4.6.16
Object
scalar
OctetString
The modem AT command required to initiate caller id logging by the modem.
Context
- MIB
- LANTRONIX-SLC-MIB
- OID
.1.3.6.1.4.1.244.1.1.4.6.16- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- slcDevIntModem
- Siblings
- 21
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slcDevIntModemModemState For the SLC internal modem, indicates how the modem will
be used. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.4.6.1 |
| slcDevIntModemDialoutLogin The login to use for dial-out connections. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.10 |
| slcDevIntModemDialbackMode For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the internal modem. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.4.6.11 |
| slcDevIntModemDialbackNum The phone number to use for dial-back connections. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.12 |
| slcDevIntModemDialbackRetries When slcDevIntModemModemState is set to dialback,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.6.13 |
| slcDevIntModemDialbackDelay When slcDevIntModemModemState is set to dialback,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.6.14 |
| slcDevIntModemCallerIdLogging If enabled, caller id logging is enabled for a modem dial-in
connection. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.4.6.15 |
| slcDevIntModemUseSites If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
con… | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.4.6.17 |
| slcDevIntModemGroup The group or groups that may access the internal modem
connection. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.18 |
| slcDevIntModemIdleTimeout The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP conne… | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.6.19 |
| slcDevIntModemModemMode For the SLC internal modem, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back). | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.4.6.2 |
| slcDevIntModemRestartDelay The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections. | scalar | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.244.1.1.4.6.20 |
| slcDevIntModemNATState If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.4.6.21 |
| slcDevIntModemDialtoneCheck The time (in minutes) between checks for a modem dialtone.
A value of 0 indicates that dialtone checks are disabled. | scalar | minutes Integer32 | .1.3.6.1.4.1.244.1.1.4.6.22 |
| slcDevIntModemLocalIP For PPP connections, the local IP Address - all zeros if it
should be negotiated. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.4.6.3 |
| slcDevIntModemRemoteIP For PPP connections, the remote IP Address - all zeros if it
should be negotiated. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.4.6.4 |
| slcDevIntModemAuth For PPP connections, the type of authentication to be used. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.4.6.5 |
| slcDevIntModemCHAPHost For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.6 |
| slcDevIntModemInitScript The initialization script for an internal modem. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.7 |
| slcDevIntModemTimeout The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled. | scalar | minutes Integer32 | .1.3.6.1.4.1.244.1.1.4.6.8 |
| slcDevIntModemDialoutNum The phone number to use for dial-out connections. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.4.6.9 |