l2tpTunnelConfigReassemblyTO
L2TP-MIB ·
.1.3.6.1.2.1.10.95.1.4.1.12
Object
column
r/w
L2tpMilliSeconds
This object defines the number of milliseconds that this tunnel will wait before processing payload packets that were received out of sequence (which are waiting for the packet(s) to put them in sequence). A low value increases the chance of delayed packets to be discarded (which MAY cause the PPP decompression engine to reset) while a high value may cause more queuing and possibly degrade throughput if packets are truly lost. The default value for this object is zero which will result in all delayed packets being lost. Modifications to this object have immediate effect.
Context
- MIB
- L2TP-MIB
- OID
.1.3.6.1.2.1.10.95.1.4.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- l2tpTunnelConfigEntry
- Table
- l2tpTunnelConfigTable
- Siblings
- 14
Syntax
L2tpMilliSeconds
- Source
- L2tpMilliSeconds
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483646
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l2tpTunnelConfigIfIndex This value for this object is equal to the value
of ifIndex of the Interfaces MIB for tunnel
interfaces of type L2TP. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.10.95.1.4.1.1 |
| l2tpTunnelConfigControlMaxRetxTO This object defines the maximum retransmission timeout
interval which the tunnel will wait before retrans-
mitting a control packet that has not been acknowledged.
… | column | seconds Integer32 | .1.3.6.1.2.1.10.95.1.4.1.10 |
| l2tpTunnelConfigPayloadSeq This object determines whether or not session payload
packets will be requested to be sent with sequence
numbers from tunnel peers belonging to this domain.
The value onDemand(1) … | column | Enumeration | .1.3.6.1.2.1.10.95.1.4.1.11 |
| l2tpTunnelConfigTransport This object defines the underlying transport media
that is in use for this tunnel entry. Different tunnel
transports may define MIB extensions to the L2TP tunnel
table to realize … | column | Enumeration | .1.3.6.1.2.1.10.95.1.4.1.13 |
| l2tpTunnelConfigDrainTunnel Setting this object to 'true' will prevent any new
session from being either initiated or accepted but
does NOT disconnect any active sessions for this
tunnel. Note that when this… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.95.1.4.1.14 |
| l2tpTunnelConfigProxyPPPAuth This object is used to configure the sending
or acceptance of the session PPP Proxy
Authentication AVP's on the LAC or LNS. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.95.1.4.1.15 |
| l2tpTunnelConfigDomainId The tunnel domain that this tunnel belongs
to. A LNS tunnel endpoint will typically inherit
this value from the endpoint domain table. A
LAC may be provided with this information … | column | OctetString | .1.3.6.1.2.1.10.95.1.4.1.2 |
| l2tpTunnelConfigAuth This object describes how L2TP tunnel peers are
to be authenticated. The value 'simple' indicates
that peers are authenticated simply by their host
name as described in the Host N… | column | Enumeration | .1.3.6.1.2.1.10.95.1.4.1.3 |
| l2tpTunnelConfigSecret This object is used to configure the shared secret
used during the tunnel authentication phase of
tunnel establishment. This object cannot be modified
when the tunn… | column | OctetString | .1.3.6.1.2.1.10.95.1.4.1.4 |
| l2tpTunnelConfigSecurity This object defines whether this tunnel is to be
secured. The value of 'ipSec' indicates that all
tunnel packets, control and session, have IP
Security headers. The type of IP Sec… | column | Enumeration | .1.3.6.1.2.1.10.95.1.4.1.5 |
| l2tpTunnelConfigHelloInterval This object defines the interval in which Hello
(or keep-alive) packets are to be sent to the
tunnel peer. The value zero effectively disables
the sending of Hello packets. Modif… | column | seconds Integer32 | .1.3.6.1.2.1.10.95.1.4.1.6 |
| l2tpTunnelConfigIdleTimeout This object defines the period of time that an
established tunnel with no sessions will wait
before disconnecting the tunnel. A value of
zero indicates that the tunnel will discon… | column | seconds Integer32 | .1.3.6.1.2.1.10.95.1.4.1.7 |
| l2tpTunnelConfigControlRWS This object defines the control channel receive
window size. It specifies the maximum number of
packets the tunnel peer can send without waiting
for an acknowledgement from this p… | column | Integer32 | .1.3.6.1.2.1.10.95.1.4.1.8 |
| l2tpTunnelConfigControlMaxRetx This object defines the number of retransmissions
which the tunnel will attempt before assuming that
the peer is no longer responding. A value of zero
indicates that this peer wil… | column | Integer32 | .1.3.6.1.2.1.10.95.1.4.1.9 |