juniSystemReloadCommand
Juniper-System-MIB ·
.1.3.6.1.4.1.4874.2.2.2.0.8
Object
notification
Notification indicating that a slot or the entire system is about to
restart due to a system console reload command. If the reload is only
on an individual slot then the following object is included in the
notification:
juniSystemReloadSlotNumber
Context
- MIB
- Juniper-System-MIB
- OID
.1.3.6.1.4.1.4874.2.2.2.0.8- Type
- notification
- Status
- current
- Parent
- juniSystemTrap
- Siblings
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSystemHighMemUtil Report system memory utilization has met the conditions of
juniSystemHighMemUtilThreshold. If the memory capacity is greater than
2147483647, a -1 value is returned in juniSystem… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.1 |
| juniSystemIssuStateChange Notification about changes in the status, in case of ISSU upgrade.
This notification is sent when the juniSystemIssuState changes. The
trap parameter will indicate the current val… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.10 |
| juniSystemPortSfpTxMaxPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's tx-max power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.11 |
| juniSystemPortSfpTxMinPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's tx-min power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.12 |
| juniSystemPortSfpRxMaxPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's rx-max power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.13 |
| juniSystemPortSfpRxMinPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's rx-min power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.14 |
| juniSystemFpgaCorruptionDetected Notification says that trap raised is with
respect to linecard fpga corruption detection | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.15 |
| juniSystemAbatedMemUtil Reports system memory utilization has met the conditions of
juniSystemAbatedMemUtilThreshold. If the memory capacity is greater
than 2147483647, a -1 value is returned in juniSys… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.2 |
| juniSystemModuleOperStatusChange Reports a status change for a module. This trap is generated on a
transition into a stable state (online or disabled) or on a transition
out of online. If redundancy is supporte… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.3 |
| juniSystemPowerStatusChange Reports a change in the status of a power element. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.4 |
| juniSystemFanStatusChange Reports a transition between the three states of the fan subsystem.
When the fan subsystem transitions to the failed state the Thermal
Protection hold off time begins. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.5 |
| juniSystemTempStatusChange Reports a change in the temperature status. When the status
transitions to the tooHigh state the system enters Thermal Protection
mode. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.6 |
| juniSystemTempProtectionStatusChange Notification about changes in the state of Thermal Protection. This
notification is sent when the tempProtectionStatus changes. It is also
sent when the holdOffTimeRemaining is … | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.7 |
| juniSystemUtilizationThreshold Notification indicating that a system resource's utilization has met
the conditions of juniSystemUtilizationThresholdDirection. See the
DESCRIPTIONs for the juniSystemUtilization… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.9 |