juniSystemModuleOperStatusChange
Juniper-System-MIB ·
.1.3.6.1.4.1.4874.2.2.2.0.3
Object
notification
Reports a status change for a module. This trap is generated on a transition into a stable state (online or disabled) or on a transition out of online. If redundancy is supported for the module (juniSystemModuleRedundancySupported is true(1)), then the juniSystemModuleSpareServer and juniSystemModuleAssociatedSlot objects are also included in the notification.
Context
- MIB
- Juniper-System-MIB
- OID
.1.3.6.1.4.1.4874.2.2.2.0.3- Type
- notification
- Status
- current
- Parent
- juniSystemTrap
- Siblings
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSystemHighMemUtil Report system memory utilization has met the conditions of
juniSystemHighMemUtilThreshold. If the memory capacity is greater than
2147483647, a -1 value is returned in juniSystem… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.1 |
| juniSystemIssuStateChange Notification about changes in the status, in case of ISSU upgrade.
This notification is sent when the juniSystemIssuState changes. The
trap parameter will indicate the current val… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.10 |
| juniSystemPortSfpTxMaxPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's tx-max power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.11 |
| juniSystemPortSfpTxMinPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's tx-min power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.12 |
| juniSystemPortSfpRxMaxPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's rx-max power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.13 |
| juniSystemPortSfpRxMinPowerThreshold Notification says that trap raised/cleared is with
respect to link sfp's rx-min power threshold | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.14 |
| juniSystemFpgaCorruptionDetected Notification says that trap raised is with
respect to linecard fpga corruption detection | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.15 |
| juniSystemAbatedMemUtil Reports system memory utilization has met the conditions of
juniSystemAbatedMemUtilThreshold. If the memory capacity is greater
than 2147483647, a -1 value is returned in juniSys… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.2 |
| juniSystemPowerStatusChange Reports a change in the status of a power element. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.4 |
| juniSystemFanStatusChange Reports a transition between the three states of the fan subsystem.
When the fan subsystem transitions to the failed state the Thermal
Protection hold off time begins. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.5 |
| juniSystemTempStatusChange Reports a change in the temperature status. When the status
transitions to the tooHigh state the system enters Thermal Protection
mode. | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.6 |
| juniSystemTempProtectionStatusChange Notification about changes in the state of Thermal Protection. This
notification is sent when the tempProtectionStatus changes. It is also
sent when the holdOffTimeRemaining is … | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.7 |
| juniSystemReloadCommand Notification indicating that a slot or the entire system is about to
restart due to a system console reload command. If the reload is only
on an individual slot then the followin… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.8 |
| juniSystemUtilizationThreshold Notification indicating that a system resource's utilization has met
the conditions of juniSystemUtilizationThresholdDirection. See the
DESCRIPTIONs for the juniSystemUtilization… | notification | - | .1.3.6.1.4.1.4874.2.2.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSystemModuleCurrentType The personality of this module based on the combination of modules that
are currently inserted in the slot. This could be different from the
personality reported in juniSystemMod… | column | JuniSystemModuleType | .1.3.6.1.4.1.4874.2.2.2.1.3.4.1.4 |
| juniSystemModuleAdminStatus Provides administrative control to enable/disable the module. This
object is read-only for certain types of modules. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.2.1.3.5.1.5 |
| juniSystemModuleOperStatus The current operational status of the module (or sub-module):
unknown - The status of the module cannot be determined
notPresent - No hardware is currently present but th… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1 |
| juniSystemModuleDisableReason Indicates the condition causing the module (or sub-module) to be
disabled:
none - Value when the module is not disabled
unknown - Unknown reason for disable… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.3.4.1.2 |
| juniSystemModuleDescr Textual description of the expected module in this slot. | column | OctetString | .1.3.6.1.4.1.4874.2.2.2.1.3.4.1.6 |