juniL2tpSysConfigFailoverResync

Juniper-L2TP-MIB · .1.3.6.1.4.1.4874.2.2.35.1.1.1.22
MIB view Table view

Object

scalar r/w Enumeration 
Configure L2TP failover resync mechanism.
disable(0) - Disable failover resync
failoverProtocol(1) - Use  the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Failover Mechanism
failoverProtocolFallbackToSilentFailover(3) - (Default) Use the
L2TP Failover Protocol and fall back to Silent Failover.

Context

MIB
Juniper-L2TP-MIB
OID
.1.3.6.1.4.1.4874.2.2.35.1.1.1.22
Type
scalar
Access
readwrite
Status
current
Parent
juniL2tpSystemConfig
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
0disable
1failoverProtocol
2silentFailover
3failoverProtocolFallbackToSilentFailover

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniL2tpSysConfigAdminState
Exerts control over all L2TP tunnels/sessions in the system.
scalarJuniL2tpAdminState.1.3.6.1.4.1.4874.2.2.35.1.1.1.1
juniL2tpSysConfigControlRetransmissionsEstablished
It represents number of retries allowed for established tunnels before control connection goes down.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.10
juniL2tpSysConfigControlRetransmissionsNotEstablished
It represents number of retries allowed for unestablished tunnels before control connection goes down.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.11
juniL2tpSysConfigDisableChallenge
Disable inclusion of chap challenge in the outgoing packets.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.12
juniL2tpSysConfigDisableCallingNumberAvp
Enable/disable inclusion of calling number avp in ICRQ packet.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.13
juniL2tpSysConfigIgnoreTxAddressChange
Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tunnel may have separate receive and transmit address…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.35.1.1.1.14
juniL2tpSysConfigEnableDisconnectCauseAvp
Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.15
juniL2tpSysConfigReceiveWindowSize
Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritten by other more specific RWS settings.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.16
juniL2tpSysConfigEnableRxSpeedAvpWhenEqual
Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.17
juniL2tpSysConfigRejectTxAddressChange
Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ipAddressAndUdpPort(1)- reject both addres…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.35.1.1.1.18
juniL2tpSysConfigShortDrainTimeout
Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to drain upon receiving a start request.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.19
juniL2tpSysConfigDestructTimeout
The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.2
juniL2tpSysConfigDestinationLockoutTestEnabled
Enable/disable testing of failed destiantion before removing lockout.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.20
juniL2tpSysConfigDestinationLockoutTimeout
Failed destination remains locked out for the specified amount of time.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.21
juniL2tpSysConfigIpChecksumEnable
Enable/disable IP checksumming for tunnels with UDP/IP transport.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.3
juniL2tpSysConfigTunnelSwitchingEnabled
Tunnel switching enabled/disable.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.4
juniL2tpSysConfigControlRetransmissions deprecated
The number of retransmission retries allowed before control connection goes down. This object has been replaced by juniL2tpSysConfigControlRetransmissionsEstablished an…
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.5
juniL2tpSysConfigTunnelIdleTimeout
Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.6
juniL2tpSysConfigReceiveDataSequencingIgnore
Enable/disable ignoring of receive sequencing of L2TP data packets.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.7
juniL2tpSysConfigFailoverWithinPreference
Enable/disable fail-over within a preference level.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.8
juniL2tpSysConfigWeightedLoadBalancing
Enable/disable weighted load balancing.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.9