juniL2tpSysConfigDestructTimeout
Juniper-L2TP-MIB ·
.1.3.6.1.4.1.4874.2.2.35.1.1.1.2
Object
scalar
r/w
seconds Integer32
The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics.
Context
- MIB
- Juniper-L2TP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.35.1.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- juniL2tpSystemConfig
- Siblings
- 21
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 10-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniL2tpSysConfigAdminState Exerts control over all L2TP tunnels/sessions in the system. | scalar | JuniL2tpAdminState | .1.3.6.1.4.1.4874.2.2.35.1.1.1.1 |
| juniL2tpSysConfigControlRetransmissionsEstablished It represents number of retries allowed for established tunnels before
control connection goes down. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.10 |
| juniL2tpSysConfigControlRetransmissionsNotEstablished It represents number of retries allowed for unestablished tunnels
before control connection goes down. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.11 |
| juniL2tpSysConfigDisableChallenge Disable inclusion of chap challenge in the outgoing packets. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.12 |
| juniL2tpSysConfigDisableCallingNumberAvp Enable/disable inclusion of calling number avp in ICRQ packet. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.13 |
| juniL2tpSysConfigIgnoreTxAddressChange Configure L2TP to ignore IP address and/or UDP port changes on incoming
SCCRP messages. When this feature is enabled the L2TP tunnel may have
separate receive and transmit address… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.35.1.1.1.14 |
| juniL2tpSysConfigEnableDisconnectCauseAvp Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN
packet. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.15 |
| juniL2tpSysConfigReceiveWindowSize Configure the global L2TP receive window size. A value
of 0 indicates the system chooses the RWS. This object
may be overwritten by other more specific RWS settings. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.16 |
| juniL2tpSysConfigEnableRxSpeedAvpWhenEqual Enable/disable generation of L2TP RX speed AVP when RX and TX speeds
are equal. Note the RX speed is always generated when the
RX and TX speeds differ. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.17 |
| juniL2tpSysConfigRejectTxAddressChange Configure L2TP to reject IP address and/or UDP port changes on incomming
SCCRP messages.
disable(0) - address change is allowed
ipAddressAndUdpPort(1)- reject both addres… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.35.1.1.1.18 |
| juniL2tpSysConfigShortDrainTimeout Configure the L2TP short drain interval. This interval represents the
time a tunnel, that is already draining, will continue to drain upon
receiving a start request. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.19 |
| juniL2tpSysConfigDestinationLockoutTestEnabled Enable/disable testing of failed destiantion before removing lockout. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.20 |
| juniL2tpSysConfigDestinationLockoutTimeout Failed destination remains locked out for the specified amount of time. | scalar | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.21 |
| juniL2tpSysConfigFailoverResync Configure L2TP failover resync mechanism.
disable(0) - Disable failover resync
failoverProtocol(1) - Use the L2TP Failover Protocol
silentFailover(2) - Use the JUNOSe Silent Fail… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.35.1.1.1.22 |
| juniL2tpSysConfigIpChecksumEnable Enable/disable IP checksumming for tunnels with UDP/IP transport. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.3 |
| juniL2tpSysConfigTunnelSwitchingEnabled Tunnel switching enabled/disable. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.4 |
| juniL2tpSysConfigControlRetransmissions deprecated The number of retransmission retries allowed before control connection
goes down.
This object has been replaced by
juniL2tpSysConfigControlRetransmissionsEstablished an… | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.5 |
| juniL2tpSysConfigTunnelIdleTimeout Idle tunnel remains active for the specified amount of time; value 0
disables the timer i.e. tunnel becomes persistent. | scalar | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.35.1.1.1.6 |
| juniL2tpSysConfigReceiveDataSequencingIgnore Enable/disable ignoring of receive sequencing of L2TP data packets. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.7 |
| juniL2tpSysConfigFailoverWithinPreference Enable/disable fail-over within a preference level. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.8 |
| juniL2tpSysConfigWeightedLoadBalancing Enable/disable weighted load balancing. | scalar | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.35.1.1.1.9 |