juniL2tpSysConfigControlRetransmissions

Juniper-L2TP-MIB · .1.3.6.1.4.1.4874.2.2.35.1.1.1.5
MIB view Table view

Object

scalar deprecated r/w Integer32 
The number of retransmission retries allowed before control connection
goes down.
          
This object has been replaced by
juniL2tpSysConfigControlRetransmissionsEstablished and
juniL2tpSysConfigControlRetransmissionsNotEstablished.

Context

MIB
Juniper-L2TP-MIB
OID
.1.3.6.1.4.1.4874.2.2.35.1.1.1.5
Type
scalar
Access
readwrite
Status
deprecated
Parent
juniL2tpSystemConfig
Siblings
21

Syntax

Integer32

Values & Constraints

Object Constraints
range: 2-30

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniL2tpSysConfigAdminState
Exerts control over all L2TP tunnels/sessions in the system.
scalarJuniL2tpAdminState.1.3.6.1.4.1.4874.2.2.35.1.1.1.1
juniL2tpSysConfigControlRetransmissionsEstablished
It represents number of retries allowed for established tunnels before control connection goes down.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.10
juniL2tpSysConfigControlRetransmissionsNotEstablished
It represents number of retries allowed for unestablished tunnels before control connection goes down.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.11
juniL2tpSysConfigDisableChallenge
Disable inclusion of chap challenge in the outgoing packets.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.12
juniL2tpSysConfigDisableCallingNumberAvp
Enable/disable inclusion of calling number avp in ICRQ packet.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.13
juniL2tpSysConfigIgnoreTxAddressChange
Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tunnel may have separate receive and transmit address…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.35.1.1.1.14
juniL2tpSysConfigEnableDisconnectCauseAvp
Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.15
juniL2tpSysConfigReceiveWindowSize
Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritten by other more specific RWS settings.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.16
juniL2tpSysConfigEnableRxSpeedAvpWhenEqual
Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.17
juniL2tpSysConfigRejectTxAddressChange
Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ipAddressAndUdpPort(1)- reject both addres…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.35.1.1.1.18
juniL2tpSysConfigShortDrainTimeout
Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to drain upon receiving a start request.
scalarInteger32.1.3.6.1.4.1.4874.2.2.35.1.1.1.19
juniL2tpSysConfigDestructTimeout
The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.2
juniL2tpSysConfigDestinationLockoutTestEnabled
Enable/disable testing of failed destiantion before removing lockout.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.20
juniL2tpSysConfigDestinationLockoutTimeout
Failed destination remains locked out for the specified amount of time.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.21
juniL2tpSysConfigFailoverResync
Configure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Protocol silentFailover(2) - Use the JUNOSe Silent Fail…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.35.1.1.1.22
juniL2tpSysConfigIpChecksumEnable
Enable/disable IP checksumming for tunnels with UDP/IP transport.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.3
juniL2tpSysConfigTunnelSwitchingEnabled
Tunnel switching enabled/disable.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.4
juniL2tpSysConfigTunnelIdleTimeout
Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.35.1.1.1.6
juniL2tpSysConfigReceiveDataSequencingIgnore
Enable/disable ignoring of receive sequencing of L2TP data packets.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.7
juniL2tpSysConfigFailoverWithinPreference
Enable/disable fail-over within a preference level.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.8
juniL2tpSysConfigWeightedLoadBalancing
Enable/disable weighted load balancing.
scalarJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.35.1.1.1.9