juniFrCircuitLogicalIfIndex

Juniper-FRAME-RELAY-MIB · .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20

Object

column r/w IF-MIBInterfaceIndex

Normally the same value as frDlcmiIfIndex, but different when an
implementation associates a virtual ifEntry with a DLC or set of DLCs in
order to associate higher layer objects such as the ipAddrEntry with a
subset of the virtual circuits on a Frame Relay interface. The type of
such ifEntries is defined by the higher layer object; for example, if
PPP/Frame Relay is implemented, the ifType of this ifEntry would be PPP.
If it is not so defined, as would be the case with an ipAddrEntry, it
should be of type Other.

Context

MIB: Juniper-FRAME-RELAY-MIB
OID: .1.3.6.1.4.1.4874.2.2.10.1.1.4.1.20
Type: column
Access: readwrite
Status: current
Parent: juniFrCircuitEntry
Table: juniFrCircuitTable
Siblings: 22

Syntax

IF-MIBInterfaceIndex

Source: IF-MIBInterfaceIndex
Base type: Integer32

Values & Constraints

Type Constraints

range: 1..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
juniFrCircuitIfIndex The ifIndex Value of the ifEntry this virtual circuit is layered onto.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.1`
juniFrCircuitCreationTime The value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.10`
juniFrCircuitLastTimeChange The value of sysUpTime when last there was a change in the virtual circuit state	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.11`
juniFrCircuitCommittedBurst This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval. A value of zero (the de…	column	Integer32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.12`
juniFrCircuitExcessBurst This variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not confi…	column	Integer32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.13`
juniFrCircuitThroughput Throughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement int…	column	Integer32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.14`
juniFrCircuitMulticast This indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed to.	column	Enumeration	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.15`
juniFrCircuitType Indication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.	column	Enumeration	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.16`
juniFrCircuitDiscards The number of inbound frames dropped because of format errors, or because the VC is inactive.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.17`
juniFrCircuitReceivedDEs Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag,…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.18`
juniFrCircuitSentDEs Number of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indica…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.19`
juniFrCircuitDlci The Data Link Connection Identifier for this virtual circuit.	column	FRAME-RELAY-DTE-MIBDLCI	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.2`
juniFrCircuitRowStatus This object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in th…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.21`
juniFrCircuitSentFECNs Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in …	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.22`
juniFrCircuitSentBECNs Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.23`
juniFrCircuitState Indicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by s…	column	Enumeration	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.3`
juniFrCircuitReceivedFECNs Number of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a swit…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.4`
juniFrCircuitReceivedBECNs Number of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a swi…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.5`
juniFrCircuitSentFrames The number of frames sent from this virtual circuit since it was created.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.6`
juniFrCircuitSentOctets The number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters o…	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.7`
juniFrCircuitReceivedFrames Number of frames received over this virtual circuit since it was created.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.8`
juniFrCircuitReceivedOctets Number of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.4874.2.2.10.1.1.4.1.9`