juniERXSysChassisRev

Juniper-ERX-System-MIB · .1.3.6.1.4.1.4874.2.2.17.1.1.1
MIB view Table view

Object

scalar deprecated Integer32 
Chassis revision number.  If unknown, the value 255 is reported.

Context

MIB
Juniper-ERX-System-MIB
OID
.1.3.6.1.4.1.4874.2.2.17.1.1.1
Type
scalar
Access
readonly
Status
deprecated
Parent
juniERXSysGeneral
Siblings
24

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniERXSysBootAutoRevertCountTolerance deprecated
The auto-revert reboot count tolerance. This object cannot be set to zero, but may contain a zero value when the control is set to never(1).
scalarUnsigned32.1.3.6.1.4.1.4874.2.2.17.1.1.10
juniERXSysBootAutoRevertTimeTolerance deprecated
The auto-revert reboot time tolerance. This object cannot be set to zero, but will contain a zero value when the control is set to never(1).
scalarseconds Unsigned32.1.3.6.1.4.1.4874.2.2.17.1.1.11
juniERXSysBootReleaseFile deprecated
The local boot release file name, with extension .rel.
scalarOctetString.1.3.6.1.4.1.4874.2.2.17.1.1.12
juniERXSysBootConfigFile deprecated
The local boot configuration file name, with extension .cnf. The juniERXSysBootConfigControl and juniERXSysBootConfigFile must be specified together in the same set request PDU.
scalarOctetString.1.3.6.1.4.1.4874.2.2.17.1.1.13
juniERXSysBootBackupReleaseFile deprecated
The local backup boot release file name, with extension .rel.
scalarOctetString.1.3.6.1.4.1.4874.2.2.17.1.1.14
juniERXSysBootBackupConfigFile deprecated
The local backup boot configuration file name, with extension .cnf. The juniERXSysBootBackupConfigControl and juniERXSysBootBackupConfigFile must be specified together in the same…
scalarOctetString.1.3.6.1.4.1.4874.2.2.17.1.1.15
juniERXSysAdminTimingSource deprecated
The administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current ti…
scalarJuniTimingSelector.1.3.6.1.4.1.4874.2.2.17.1.1.16
juniERXSysOperTimingSource deprecated
The operations timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current timing…
scalarJuniTimingSelector.1.3.6.1.4.1.4874.2.2.17.1.1.17
juniERXSysTimingDisableAutoUpgrade deprecated
This object controls the automatic timing selector upgrade. Setting this object to true(1) will prevent automatic upgrade to the next highest timing selector. Setting this objec…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.17.1.1.18
juniERXSysTimingSelectorTable deprecated
Table of system timing selectors.
table-.1.3.6.1.4.1.4874.2.2.17.1.1.19
juniERXSysSwVersion deprecated
Currently executing operational software version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4874.2.2.17.1.1.2
juniERXSysMemUtilPct deprecated
Percentage of system memory utilization. A value of -1 indicates the utilization is unknown.
scalarpercent Integer32.1.3.6.1.4.1.4874.2.2.17.1.1.20
juniERXSysMemCapacity deprecated
The total memory capacity of the system. Negative values are returned when the capacity exceeds 2147483647; interpret the negative 32-bit integer as an unsigned 32-bit integer va…
scalarbytes SNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.17.1.1.21
juniERXSysHighMemUtilThreshold deprecated
The value of system memory utilization, where if reached for the first time will generate a high memory utilization event to the management entity on this system. The v…
scalarpercent Integer32.1.3.6.1.4.1.4874.2.2.17.1.1.22
juniERXSysAbatedMemUtilThreshold deprecated
The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system. …
scalarpercent Integer32.1.3.6.1.4.1.4874.2.2.17.1.1.23
juniERXSysMemUtilTrapEnable deprecated
Controls the sending of system memory utilization events. Setting the value of this object to true(1) will cause system memory utilization event notification, if they occur, to b…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.17.1.1.24
juniERXSysGeneralTrapEnable deprecated
Controls whether a member of the set of ERX system notifications (traps) defined in this MIB or the counterpart notifications defined in the generic E-series system MIB (Juniper-S…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.17.1.1.25
juniERXSysSwBuildDate deprecated
Build date of currently executing operational software version.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4874.2.2.17.1.1.3
juniERXSysRevertControl deprecated
Global revert control: off Disable global revert. immediate All slots are to revert immediately (asap). timeOfDay All slots are to revert at time specified…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.17.1.1.4
juniERXSysRevertTimeOfDay deprecated
The number of seconds past midnight on any given day at which time reverts are allowed to occur. This object must be set concurrently with juniERXSysRevertControl.
scalarseconds Integer32.1.3.6.1.4.1.4874.2.2.17.1.1.5
juniERXSysBootConfigControl deprecated
System boot configuration control: file Revert to configuration settings specified by juniERXSysBootConfigFile. The j…
scalarEnumeration.1.3.6.1.4.1.4874.2.2.17.1.1.6
juniERXSysBootBackupConfigControl deprecated
System boot backup configuration control: file Revert to backup configuration settings specified by juniERXSysBootBackupConfigFile. …
scalarEnumeration.1.3.6.1.4.1.4874.2.2.17.1.1.7
juniERXSysBootForceBackupControl deprecated
System boot force backup control: off Do not force revert to backup settings. on Do force revert to backup settings.
scalarEnumeration.1.3.6.1.4.1.4874.2.2.17.1.1.8
juniERXSysBootAutoRevertControl deprecated
System boot auto revert control: default Use default auto-revert tolerances. never Never auto-revert to backup. set Set auto-revert settings at specified tolerances.
scalarEnumeration.1.3.6.1.4.1.4874.2.2.17.1.1.9