juniERXSysBootConfigControl
Juniper-ERX-System-MIB ·
.1.3.6.1.4.1.4874.2.2.17.1.1.6
Object
scalar
deprecated
r/w
Enumeration
System boot configuration control:
file Revert to configuration settings specified by
juniERXSysBootConfigFile. The
juniERXSysBootConfigControl and
juniERXSysBootConfigFile must be specified
together in the same set request PDU.
fileOnce Revert to configuration settings specified by
juniERXSysBootConfigFile. Do not continue to
use file after using it once. The
juniERXSysBootConfigControl and
juniERXSysBootConfigFile must be specified
together in the same set request PDU.
factoryDefaults Revert to factory default settings.
runningConfiguration Revert to current settings.
Context
- MIB
- Juniper-ERX-System-MIB
- OID
.1.3.6.1.4.1.4874.2.2.17.1.1.6- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- juniERXSysGeneral
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | file |
1 | fileOnce |
2 | factoryDefaults |
3 | runningConfiguration |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniERXSysChassisRev deprecated Chassis revision number. If unknown, the value 255 is reported. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.17.1.1.1 |
| juniERXSysBootAutoRevertCountTolerance deprecated The auto-revert reboot count tolerance. This object cannot be set to
zero, but may contain a zero value when the control is set to never(1). | scalar | Unsigned32 | .1.3.6.1.4.1.4874.2.2.17.1.1.10 |
| juniERXSysBootAutoRevertTimeTolerance deprecated The auto-revert reboot time tolerance. This object cannot be set to
zero, but will contain a zero value when the control is set to
never(1). | scalar | seconds Unsigned32 | .1.3.6.1.4.1.4874.2.2.17.1.1.11 |
| juniERXSysBootReleaseFile deprecated The local boot release file name, with extension .rel. | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.17.1.1.12 |
| juniERXSysBootConfigFile deprecated The local boot configuration file name, with extension .cnf. The
juniERXSysBootConfigControl and juniERXSysBootConfigFile must be
specified together in the same set request PDU. | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.17.1.1.13 |
| juniERXSysBootBackupReleaseFile deprecated The local backup boot release file name, with extension .rel. | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.17.1.1.14 |
| juniERXSysBootBackupConfigFile deprecated The local backup boot configuration file name, with extension .cnf.
The juniERXSysBootBackupConfigControl and juniERXSysBootBackupConfigFile
must be specified together in the same… | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.17.1.1.15 |
| juniERXSysAdminTimingSource deprecated The administrative timing source for the ERX system. The ERX
periodically monitors the status of three timing sources, primary,
secondary and tertiary. If the systems current ti… | scalar | JuniTimingSelector | .1.3.6.1.4.1.4874.2.2.17.1.1.16 |
| juniERXSysOperTimingSource deprecated The operations timing source for the ERX system. The ERX periodically
monitors the status of three timing sources, primary, secondary and
tertiary. If the systems current timing… | scalar | JuniTimingSelector | .1.3.6.1.4.1.4874.2.2.17.1.1.17 |
| juniERXSysTimingDisableAutoUpgrade deprecated This object controls the automatic timing selector upgrade. Setting
this object to true(1) will prevent automatic upgrade to the next
highest timing selector. Setting this objec… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.17.1.1.18 |
| juniERXSysTimingSelectorTable deprecated Table of system timing selectors. | table | - | .1.3.6.1.4.1.4874.2.2.17.1.1.19 |
| juniERXSysSwVersion deprecated Currently executing operational software version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.17.1.1.2 |
| juniERXSysMemUtilPct deprecated Percentage of system memory utilization. A value of -1 indicates the
utilization is unknown. | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.17.1.1.20 |
| juniERXSysMemCapacity deprecated The total memory capacity of the system. Negative values are returned
when the capacity exceeds 2147483647; interpret the negative 32-bit
integer as an unsigned 32-bit integer va… | scalar | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.17.1.1.21 |
| juniERXSysHighMemUtilThreshold deprecated The value of system memory utilization, where if reached for the first
time will generate a high memory utilization event to the management
entity on this system.
The v… | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.17.1.1.22 |
| juniERXSysAbatedMemUtilThreshold deprecated The value of system memory utilization that is used to determine when
to generate an abated memory utilization event notification to the
management entity on this system.
… | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.17.1.1.23 |
| juniERXSysMemUtilTrapEnable deprecated Controls the sending of system memory utilization events. Setting the
value of this object to true(1) will cause system memory utilization
event notification, if they occur, to b… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.17.1.1.24 |
| juniERXSysGeneralTrapEnable deprecated Controls whether a member of the set of ERX system notifications
(traps) defined in this MIB or the counterpart notifications defined in
the generic E-series system MIB (Juniper-S… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.17.1.1.25 |
| juniERXSysSwBuildDate deprecated Build date of currently executing operational software version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.17.1.1.3 |
| juniERXSysRevertControl deprecated Global revert control:
off Disable global revert.
immediate All slots are to revert immediately (asap).
timeOfDay All slots are to revert at time specified… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.17.1.1.4 |
| juniERXSysRevertTimeOfDay deprecated The number of seconds past midnight on any given day at which time
reverts are allowed to occur. This object must be set concurrently with
juniERXSysRevertControl. | scalar | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.17.1.1.5 |
| juniERXSysBootBackupConfigControl deprecated System boot backup configuration control:
file Revert to backup configuration settings
specified by juniERXSysBootBackupConfigFile.
… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.17.1.1.7 |
| juniERXSysBootForceBackupControl deprecated System boot force backup control:
off Do not force revert to backup settings.
on Do force revert to backup settings. | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.17.1.1.8 |
| juniERXSysBootAutoRevertControl deprecated System boot auto revert control:
default Use default auto-revert tolerances.
never Never auto-revert to backup.
set Set auto-revert settings at specified tolerances. | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.17.1.1.9 |