jnxPingEgressStdDevThresholdExceeded
JUNIPER-PING-MIB ·
.1.3.6.1.4.1.2636.4.9.0.5
Object
notification
This notification is generated when the standard deviation of the egress time (jnxPingResultsStddevEgressUs) exceeds the configured threshold (jnxPingCtlEgressStdDevThreshold) and the egressStdDevThreshold bit is set in jnxPingCtlTrapGeneration.
Context
- MIB
- JUNIPER-PING-MIB
- OID
.1.3.6.1.4.1.2636.4.9.0.5- Type
- notification
- Status
- current
- Parent
- jnxPingNotificationPrefix
- Siblings
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxPingRttThresholdExceeded This notification is generated when the round trip time
(jnxPingCtlRttThreshold) exceeds the configured
threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is
set in jnxP… | notification | - | .1.3.6.1.4.1.2636.4.9.0.1 |
| jnxPingMaxRttThresholdExceeded This notification is generated when the max round trip time
(jnxPingCtlMaxRttThreshold) exceeds the configured
threshold (jnxPingCtlMaxRttThreshold) and the maxrttThreshold bit is… | notification | - | .1.3.6.1.4.1.2636.4.9.0.10 |
| jnxPingRttStdDevThresholdExceeded This notification is generated when the standard deviation of
the round trip time (jnxPingResultsStdDevRttUs) exceeds the
configured threshold (jnxPingCtlRttStdDevThreshold) and … | notification | - | .1.3.6.1.4.1.2636.4.9.0.2 |
| jnxPingRttJitterThresholdExceeded This notification is generated when the round trip time jitter
(jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the
configured threshold (jnxPingCtlRttJitterThreshol… | notification | - | .1.3.6.1.4.1.2636.4.9.0.3 |
| jnxPingEgressThresholdExceeded This notification is generated when the egress time
(jnxPingResultsEgressUs) exceeds the configured
threshold (jnxPingCtlEgressTimeThreshold) and the
egressThreshold bit is set … | notification | - | .1.3.6.1.4.1.2636.4.9.0.4 |
| jnxPingEgressJitterThresholdExceeded This notification is generated when the egress time jitter
(jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs)
exceeds the configured threshold (jnxPingCtlEgressJitterThr… | notification | - | .1.3.6.1.4.1.2636.4.9.0.6 |
| jnxPingIngressThresholdExceeded This notification is generated when the ingress time
(jnxPingResultsIngressUs) exceeds the configured
threshold (jnxPingCtlIngressTimeThreshold) and the
ingressThreshold bit is … | notification | - | .1.3.6.1.4.1.2636.4.9.0.7 |
| jnxPingIngressStddevThresholdExceeded This notification is generated when the standard deviation of
the ingress time (jnxPingResultsStddevIngressUs) exceeds the
configured threshold (jnxPingCtlIngressStddevThreshold)… | notification | - | .1.3.6.1.4.1.2636.4.9.0.8 |
| jnxPingIngressJitterThresholdExceeded This notification is generated when the ingress time jitter
(jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs)
exceeds the configured threshold (jnxPingCtlIngressJitte… | notification | - | .1.3.6.1.4.1.2636.4.9.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| DISMAN-PING-MIBpingCtlTargetAddressType Specifies the type of host address to be used at a remote
host for performing a ping operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.2.1.3 |
| DISMAN-PING-MIBpingCtlTargetAddress Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the value of the corresponding
pingCtlTargetAddress… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.2.1.4 |
| DISMAN-PING-MIBpingResultsOperStatus Reflects the operational state of a pingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
completed(3) - Test is completed. | column | Enumeration | .1.3.6.1.2.1.80.1.3.1.1 |
| DISMAN-PING-MIBpingResultsIpTargetAddressType This object indicates the type of address stored
in the corresponding pingResultsIpTargetAddress
object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.3.1.2 |
| DISMAN-PING-MIBpingResultsIpTargetAddress This object reports the IP address associated
with a pingCtlTargetAddress value when the destination
address is specified as a DNS name. The value of
this object should be a zero… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.3.1.3 |
| jnxPingResultsMinEgressUs The minimum of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.8 |
| jnxPingResultsMaxEgressUs The maximum of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.9 |
| jnxPingResultsAvgEgressUs The average of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.10 |
| DISMAN-PING-MIBpingResultsProbeResponses Number of responses received for the corresponding
pingCtlEntry and pingResultsEntry. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | responses SNMPv2-SMIGauge32 | .1.3.6.1.2.1.80.1.3.1.7 |
| DISMAN-PING-MIBpingResultsSentProbes The value of this object reflects the number of probes sent
for the corresponding pingCtlEntry and pingResultsEntry.
The value of this object MUST be reported as 0 when no probes
… | column | probes SNMPv2-SMIGauge32 | .1.3.6.1.2.1.80.1.3.1.8 |
| DISMAN-PING-MIBpingResultsLastGoodProbe Date and time when the last response was received for
a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.80.1.3.1.10 |
| jnxPingResultsStddevEgressUs The standard deviation of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides o… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.11 |
| jnxPingCtlEgressStdDevThreshold The maximum egress trip time standard deviation allowed over the
course of any test. If the calculated standard deviation of the
egress trip time at the end of any test exceeds t… | column | microseconds Unsigned32 | .1.3.6.1.4.1.2636.3.7.1.2.1.11 |
| jnxPingResultsStddevEgressUs The standard deviation of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides o… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.11 |