jnxPingEgressThresholdExceeded
JUNIPER-PING-MIB ·
.1.3.6.1.4.1.2636.4.9.0.4
Object
notification
This notification is generated when the egress time (jnxPingResultsEgressUs) exceeds the configured threshold (jnxPingCtlEgressTimeThreshold) and the egressThreshold bit is set in jnxPingCtlTrapGeneration.
Context
- MIB
- JUNIPER-PING-MIB
- OID
.1.3.6.1.4.1.2636.4.9.0.4- Type
- notification
- Status
- current
- Parent
- jnxPingNotificationPrefix
- Siblings
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxPingRttThresholdExceeded This notification is generated when the round trip time
(jnxPingCtlRttThreshold) exceeds the configured
threshold (jnxPingCtlRttThreshold) and the rttThreshold bit is
set in jnxP… | notification | - | .1.3.6.1.4.1.2636.4.9.0.1 |
| jnxPingMaxRttThresholdExceeded This notification is generated when the max round trip time
(jnxPingCtlMaxRttThreshold) exceeds the configured
threshold (jnxPingCtlMaxRttThreshold) and the maxrttThreshold bit is… | notification | - | .1.3.6.1.4.1.2636.4.9.0.10 |
| jnxPingRttStdDevThresholdExceeded This notification is generated when the standard deviation of
the round trip time (jnxPingResultsStdDevRttUs) exceeds the
configured threshold (jnxPingCtlRttStdDevThreshold) and … | notification | - | .1.3.6.1.4.1.2636.4.9.0.2 |
| jnxPingRttJitterThresholdExceeded This notification is generated when the round trip time jitter
(jnxPingResultsMaxRttUs minus jnxPingResultsMinRttUs) exceeds the
configured threshold (jnxPingCtlRttJitterThreshol… | notification | - | .1.3.6.1.4.1.2636.4.9.0.3 |
| jnxPingEgressStdDevThresholdExceeded This notification is generated when the standard deviation of
the egress time (jnxPingResultsStddevEgressUs) exceeds the
configured threshold (jnxPingCtlEgressStdDevThreshold) an… | notification | - | .1.3.6.1.4.1.2636.4.9.0.5 |
| jnxPingEgressJitterThresholdExceeded This notification is generated when the egress time jitter
(jnxPingResultsMaxEgressUs minus jnxPingResultsMinEgressUs)
exceeds the configured threshold (jnxPingCtlEgressJitterThr… | notification | - | .1.3.6.1.4.1.2636.4.9.0.6 |
| jnxPingIngressThresholdExceeded This notification is generated when the ingress time
(jnxPingResultsIngressUs) exceeds the configured
threshold (jnxPingCtlIngressTimeThreshold) and the
ingressThreshold bit is … | notification | - | .1.3.6.1.4.1.2636.4.9.0.7 |
| jnxPingIngressStddevThresholdExceeded This notification is generated when the standard deviation of
the ingress time (jnxPingResultsStddevIngressUs) exceeds the
configured threshold (jnxPingCtlIngressStddevThreshold)… | notification | - | .1.3.6.1.4.1.2636.4.9.0.8 |
| jnxPingIngressJitterThresholdExceeded This notification is generated when the ingress time jitter
(jnxPingResultsMaxIngressUs minus jnxPingResultsMinIngressUs)
exceeds the configured threshold (jnxPingCtlIngressJitte… | notification | - | .1.3.6.1.4.1.2636.4.9.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| DISMAN-PING-MIBpingCtlTargetAddressType Specifies the type of host address to be used at a remote
host for performing a ping operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.2.1.3 |
| DISMAN-PING-MIBpingCtlTargetAddress Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the value of the corresponding
pingCtlTargetAddress… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.2.1.4 |
| DISMAN-PING-MIBpingResultsOperStatus Reflects the operational state of a pingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
completed(3) - Test is completed. | column | Enumeration | .1.3.6.1.2.1.80.1.3.1.1 |
| DISMAN-PING-MIBpingResultsIpTargetAddressType This object indicates the type of address stored
in the corresponding pingResultsIpTargetAddress
object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.3.1.2 |
| DISMAN-PING-MIBpingResultsIpTargetAddress This object reports the IP address associated
with a pingCtlTargetAddress value when the destination
address is specified as a DNS name. The value of
this object should be a zero… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.3.1.3 |
| jnxPingResultsMinEgressUs The minimum of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.8 |
| jnxPingResultsMaxEgressUs The maximum of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.9 |
| jnxPingResultsAvgEgressUs The average of the egress trip delays measured over all
probes during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-way dela… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.10 |
| DISMAN-PING-MIBpingResultsProbeResponses Number of responses received for the corresponding
pingCtlEntry and pingResultsEntry. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | responses SNMPv2-SMIGauge32 | .1.3.6.1.2.1.80.1.3.1.7 |
| DISMAN-PING-MIBpingResultsSentProbes The value of this object reflects the number of probes sent
for the corresponding pingCtlEntry and pingResultsEntry.
The value of this object MUST be reported as 0 when no probes
… | column | probes SNMPv2-SMIGauge32 | .1.3.6.1.2.1.80.1.3.1.8 |
| DISMAN-PING-MIBpingResultsLastGoodProbe Date and time when the last response was received for
a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.80.1.3.1.10 |
| jnxPingCtlEgressTimeThreshold Maximum egress trip time allowed. If this threshold is crossed by
any probe, a jnxPingEgressThresholdExceeded trap will be sent.
This applies only if the probe type (pingCtlType)… | column | microseconds Unsigned32 | .1.3.6.1.4.1.2636.3.7.1.2.1.10 |
| jnxPingResultsEgressUs The egress trip delays measured for the most recent successful probe
during this test. Measured in microseconds.
This applies only if the probe type (pingCtlType)
provides one-wa… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.7.1.3.1.7 |